LM2594N-3.3/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2594N-3.3/NOPB is a monolithic switching regulator designed for use in a wide variety of applications. The device is designed for the relatively small output currents of 0.5A, and is based on the “integrated switched capacitor” topology. This device operates in a “constant frequency, current mode architecture” and is suitable for low voltage applications such as battery powered applications.

The LM2594N-3.3/NOPB is a easy-to-use, fully protected, and cost-effective power supply design. It is designed to maintain a constant 3.3V output voltage, no matter how the input voltage may vary. It has an adjustable current limit circuit and comprehensive under-voltage protection features that guard the device during short circuit or hot swap conditions. It also has dual start-up condition protection, which will power up and down the device smoothly and safely.

The device features a temperature stability of 0.2°C (at 25°C) and a wide operating temperature range of -40°C to +85°C. The output voltage range is 2.97V to 3.63V, and the input voltage range is 2.7V to 5.5V. It has a quiescent current of 4mA, a noise level of 65dB, and an output ripple of 90mV (at 1 A, 10 V). The switching frequency is 1.6 MHz, allowing for more efficient use of power. The LM2594N-3.3/NOPB also has an 11.6V reverse bias protection rating, allowing it to withstand a wide variety of applications.

The LM2594N-3.3/NOPB uses a phased lock loop technique to control the output voltage. The duty cycle of the output voltage is continuously modulated to ensure that the output voltage is maintained within the specified range. This is done by monitoring the output voltage and feedback signal and adjusting the frequency of the device’s internal clock in response. The device also features a frequency foldback in the event of a short circuit, which reduces the power dissipation of the device and helps protect the circuit.

The LM2594N-3.3/NOPB has very low external component requirements, making it an ideal solution for applications where space is limited. It requires minimal external components, including current sense resistors and standard capacitors. It is also designed to operate in high EMI environments and is immune to Intermodulation Distortion (IMD) due to the internal PLL circuit. This makes the LM2594N-3.3/NOPB suitable for applications such as automotive systems and medical equipment.

In summary, the LM2594N-3.3/NOPB is an excellent cost-effective solution for 3.3V fixed-output power applications. It has a wide input voltage range and temperature range, as well as low external component requirements. It is designed for use in a variety of applications and is capable of operating in high EMI environments. Additionally, it features comprehensive protection features to ensure reliable operation. Thus, the LM2594N-3.3/NOPB device is suitable for use in various applications where a reliable and cost-effective solution is needed.

The specific data is subject to PDF, and the above content is for reference