LO M670-H2K1-24-Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LO M670-H2K1-24-Z is a unique type of LED in the discrete category, with a wide range of applications and working principles. To understand it better, it\'s important to understand the basics of LED indication.

Light emitting diode (LED) indication is the use of a light source to create a discrete signal, such as a warning or alert. LEDs are used in many applications such as lighting, alarms, and industrial controls, but their success as a discrete signal is unrivaled.

The LO M670-H2K1-24-Z is an example of an LED discrete signal. It\'s a two-piece polyurethane molded case and is available in two versions: the H2K1 and the H2K3. The H2K1 has a higher level of LED and signal strength, while the H2K3 has a lower signal strength.

The LED emits a fixed intensity light signal. The signal output is determined by the size of the LED, with larger LEDs being brighter than smaller ones. For example, a 7.5mm red LED will be more powerful than a 5mm red LED.

The LO M670-H2K1-24-Z is a diode-derived LED that is used in high voltage applications, such as traffic lights and industrial controls. It features a high voltage circuit roof and LED output, high stability, and dimming matrix.

This LED is unique due to its high visibility and short-term reliability. It has a low power consumption, which makes it ideal for applications where power is limited. The LED also produces a uniform light, with no \'yellowspots\' or \'hotspots\'.

The LO M670-H2K1-24-Z is most commonly used in traffic controls and emergency warning systems. It is designed to create a visual warning in case of emergency or hazardous conditions. The output of the LED is activated by a switch and can be set to different levels for distinct warnings. The high voltage circuit ensures that the warning is readable even in high ambient lighting conditions.

The LO M670-H2K1-24-Z is also used in alarm systems. It is used to indicate when a system has been activated by an outside controller, or when its own internal alarms are triggered. It is also used in industrial control systems to indicate status or errors.

The LO M670-H2K1-24-Z is a powerful LED discrete signal that can be used for a wide range of applications. Its high voltage circuit roof and LED output creates a uniform and powerful visual warning, even under extreme lighting conditions. Additionally, its low power consumption makes it ideal for applications where power is limited.

The specific data is subject to PDF, and the above content is for reference