LP1206A0860ASTR\500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LP1206A0860ASTR/500 RF filters is a highly selective filter designed for use in sensitive radio receivers and other precision electronic systems. It has a wideband frequency response, and is typically installed in the receiver\'s IF (Intermediate Frequency) stages. The LP1206A0860ASTR/500 RF filter provides excellent selectivity and is well-suited for a variety of applications where a high level of filter performance is required.

The LP1206A0860ASTR/500 RF filter is a multi-order, interdigital type, with a high performance rating. It consists of two metal casings, each containing two different layers. The bottom layer contains the input and output ports, while the top layer includes the transmission lines and shunt capacitors for filter tuning. The two layers are connected by a conductor.

The LP1206A0860ASTR/500 RF filter is designed to provide maximum signal integrity over a wide frequency range. It is designed to reject high noise levels as well as to minimize signal distortion. Its wide-band frequency response, combined with a low insertion loss, ensures that it is suitable for use in sensitive radio receivers and other precise electronic systems.

The LP1206A0860ASTR/500 RF filter is used in many different applications, including radio receivers, navigation systems, radio astronomy, and short range communication systems. It is also used in broadcast radio systems, medical equipment, and survey instruments.

The working principle behind the LP1206A0860ASTR/500 RF filter is based on the principle of frequency selective transmission. This means that it allows only signals of a specific frequency to be transmitted while rejecting all others. This is achieved through the use of shunt capacitors, in combination with transmission lines, which effectively attenuate out-of-band signals without unduly affecting the signal in the passband.

The LP1206A0860ASTR/500 RF filter is designed to operate in temperatures between **oF (**oC) and 200oF (93oC). It has a wide dynamic range and a good signal-to-noise ratio. It also provides excellent selectivity, with its passband frequency response of up to 10 GHz.

The LP1206A0860ASTR/500 RF filter is well suited for a variety of applications in radio receivers, navigation systems, and other precision electronic systems. Its wide frequency response and good signal-to-noise ratio make it an ideal choice for these systems. Its low insertion loss ensures that it works well in signal-processing applications, and its wide dynamic range ensures that it is able to accommodate a wide range of signal levels.

The specific data is subject to PDF, and the above content is for reference