LPF-25-20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LEDs are increasingly used as lighting sources for various applications, including traffic indications, backlighting, interior lighting, automotive lighting, and general lighting. A light emitting diode (LED) is driven by a current source, the output of which is sampled, and theLEDs current is modulated accordingly. To ensure that LEDs have constant brightness, LED drivers are needed. LED drivers are designed to accept input voltages within a wide range, typically from 5V to 48V, and offer superior efficiency over traditional lighting.The LPF-25-20 is a common LED driver which provides an output current up to 25A and an output voltage of 20V. It is specifically designed to drive high brightness LEDs in a wide range of applications, such as automotive, transillumination, industrial, and commercial lighting. This LED driver offers high efficiency, low ripple and noise, low transient response time, and high LED brightness uniformity over temperature variations.The LPF-25-20 LED driver features an input-overvoltage protection and an adjustable current limit. The driver can be used in a wide range of LED applications, including street lamps, indoor and outdoor lighting, and automotive lighting. The LPF-25-20 is also designed to provide precise LED current control over a wide range of input voltages.The LPF-25-20 LED driver operates according to a non-isolated-converter topology. This topology allows the use of a single inductor, which makes the LED driver highly efficient and cost-effective. The most widely used non-isolated-converter topology is buck converter, which converts a higher input voltage to a lower output voltage by switching the inductor current. The inductor current is switched on and off at a fixed frequency, which is known as the switching frequency.When the switching frequency is low, the inductor behaves like a capacitor. The output voltage can be regulated simply by increasing or decreasing the duty cycle. When the switching frequency is high, the inductor behaves like an inductor, and the output voltage is controlled by switching the current between the supply and the load.The LPF-25-20 LED driver is driven by a step down converter, which is an inductor-based converter. The step down converter utilizes an external power supply to provide an input voltage to the driver, and then regulates the output voltage by adjusting the duty cycle of the switch. The duty cycle of the switch is adjusted according to the output voltage desired. The controller of the LPF-25-20 uses fixed frequency and synchronous rectification techniques for efficient current and power conversion.The LPF-25-20 LED driver is designed to be used in a wide variety of applications. It can be used to drive low- to medium-power LED sources such as light bars, traffic lights, street lamps, indoor and outdoor lighting, and automotive lighting. In addition, the LPF-25-20 can also be used to generate a variety of specialty lighting effects, such as blinking, fading, and strobing.The LPF-25-20 LED driver is an efficient and cost-effective solution for a variety of LED applications. It is designed to provide precise LED current control over a wide range of input voltages, and offers superior efficiency over traditional lighting. The LPF-25-20 is also designed to offer high LED brightness uniformity over temperature variations. It is easy to use and designed for long-term reliability in challenging environments.

The specific data is subject to PDF, and the above content is for reference