LQH32MN6R8K23L

DC Resistance (DCR):	1.5 Ohm Max
Height - Seated (Max):	0.087" (2.20mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Supplier Device Package:	1210
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	1MHz
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Frequency - Self Resonant:	25MHz
Q @ Freq:	20 @ 1MHz
Series:	LQH32
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	240mA
Tolerance:	±10%
Inductance:	6.8µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A Fixed Inductor (LQH32MN6R8K23L) is an electrical component used to store and release electrical energy. It contains two metal coils wrapped around a material with dielectric properties. When an alternating current is applied to the coils of a Fixed Inductor, it creates a magnetic field which can store and release energy. In addition to this, the inductor can also act as an electrical filter, blocking or allowing the flow of specific frequencies.

Application Field

The primary application of a Fixed Inductor is as a part of an amplifier or filter circuit. As a filter, the inductor can block or allow certain frequencies to pass through the circuit. This can be used to adjust the sound quality or noise levels of a sound system, radio, or television. Additionally, the inductor can be used to filter and adjust signal levels for communications systems, electronic circuits, and other electronic devices.The Fixed Inductor is also used to reduce noise levels in electronic circuits, such as in power supplies and motor control systems. In addition, the inductor can be used to increase the level of a signal or to provide a frequency-specific boost to a signal.

Working Principle

A Fixed Inductor works on the principle of inductance. When a current passes through a coil, it creates a magnetic field which can store energy. This energy can be released back into the circuit when the current is reversed.The energy stored in the inductor is proportional to the current applied to it. As the current increases, so does the amount of energy stored. This energy is then released back into the circuit as the current decreases.The inductance of a Fixed Inductor is determined mainly by its size and shape. Smaller inductors have higher inductance values at the same current and vice versa with large inductors. Inductors also come in different inductance values, from fractional microhenrys up to millihenrys.

Conclusion

The Fixed Inductor (LQH32MN6R8K23L) is a versatile electrical component used to store and release energy, act as a filter, and reduce noise levels. It is commonly used in amplifier and filter circuits, communications systems, electronic circuits, and motor control systems. The inductance of the inductor is determined by its size and shape, and is expressed in henrys. When a current is applied to a Fixed Inductor, it creates a magnetic field which stores energy; this energy is released back into the circuit as the current decreases.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description