LQH44NN151K03L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, the most common of which is the LQH44NN151K03L, are widely used in virtually all modern electronic circuits. From cell phones to computers to tablets to automobiles, these inductors are present in both the power and signal processing elements of circuits. The general purpose of an inductor is to provide energy storage and to act as a filter in a circuit. The basic characteristics of the LQH44NN151K03L are provided below.

The LQH44NN151K03L inductor is an axial-lead, non-magnetic, ferrite core type inductor. It is rated for operating temperatures between -55°C and 105°C and can handle up to 1.5A of current in a continuous cycle. The maximum inductance at 100KHz is 151μH. The inductor features a ceramic-plastic body and a very low DC resistance. The manufacturer\'s datasheet lists a variation of 0.2% in the inductance over the rated operating temperature range of -55°C to 105°C, and an operational frequency range up to 1MHz.

In terms of applications, the LQH44NN151K03L can be used for various types of power line filters, general purpose flat-response filters, DC-to-DC converters, high voltage transformers, and as part of power supply circuits. This wide application range is possible due to the fact that the inductor provides a relatively low internal resistance, making it suitable for use in high-frequency and high-power circuits.

The principle behind inductors is fairly simple. An inductor is a copper coil of wire which is wound in the same direction and then enclosed in a ferrite core. This core acts as a magnetic field, which resists changes in the current of electricity flowing through it. This resistance is referred to as "inductance" and is measured in Henries. When an alternating current (AC) is applied to the inductor, an EMF (Electro-motive Force) is induced in it, thus creating a magnetic field which opposes any changes in the current. This is known as the inductive reactance, and it is proportional to the frequency of the current.

In conclusion, the LQH44NN151K03L is a popular and widely used type of inductor. It is suited for applications such as DC-to-DC conversion, power line filtering, power supply circuits, and general purpose flat response filters. The inductor relies on the basic principle of inductance, which is the ability of a ferrite core to create a magnetic field which opposes any changes in the current, resulting in an EMF which opposes any flux changes. These properties of the LQH44NN151K03L make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference