LQW18AN36NJ00D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components that store energy in the form of magnetic fields when a current is applied. The LQW18AN36NJ00D is a surface mount, wire-wound type inductor produced by Murata Manufacturing Co., Ltd. and is suitable for use in high-density circuit constructions.

The LQW18AN36NJ00D has an inductance of 18nH at a rated current of 1.6A. It has a malfunction prevention safety factor of 2.6 at 100kHz and a self-resonance frequency greater than 100MHz. The temperature range for operating and storage is -40 to 125°C and -55 to 125°C, respectively. Other features of the LQW18AN36NJ00D include a moisture sensitivity of 3 and a flux endurance of 25,000 cycles.

The LQW18AN36NJ00D is typically used in power supplies, DC-DC converters, power amplifiers, and other high-frequency switching applications requiring a high frequency response and a wide operating temperature range. The main function of an inductor is to store energy in a magnetic field when electric current flows through it.

The working principle of the LQW18AN36NJ00D can be explained using Faraday\'s law of induction. This law states that when the amount of magnetic field lines going through a loop of wire increases or decreases, a voltage is induced across the ends of the wire. The magnitude of the induced voltage is proportional to the rate of change of magnetic flux. Thus, as the current passes through the windings of the inductor, a magnetic field is created, and this field stores energy.

The structure of the LQW18AN36NJ00D is composed of a magnetic core and a coil. The magnetic core is made of a steel or ferrite material that increases the inductance of the coil. The coil is wound with insulated enameled copper wire and forms part of the winding resistance. The windings and core are enclosed in a resin package for mechanical and environmental protection.

In summary, the LQW18AN36NJ00D is an inductor produced by Murata Manufacturing Co., Ltd. It is a wire-wound type surface mount inductor with an inductance of 18nH at a rated current of 1.6A. The LQW18AN36NJ00D is suitable for use in high-density circuit constructions such as power supplies, DC-DC converters, power amplifiers, and other high-frequency switching applications requiring a high frequency response and a wide operating temperature range. The working principle of the LQW18AN36NJ00D is based on Faraday\'s law of induction, which states that when the amount of magnetic field lines going through a loop of wire increases or decreases, a voltage is induced across the ends of the wire.

The specific data is subject to PDF, and the above content is for reference