Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor (THR) refers to a type of resistor which has leads which pass through the component and are then soldered to create the electrical connection. The LR0204F1K6 is an example of such a component. This device is designed to provide resistance in low current signals. Typically, these resistors are made of non-magnetic material, such as metal films, carbon films, cermet, wire-wound, and composition.

LR0204F1K6 Application Field and Working Principle

LR0204F1K6 is typically used in high frequency and high temperature application. Its working principle is based on the principle of Ohm\'s law. According to Ohm\'s law, when a current is flowing through the resistor, it will encounter resistance in the form of voltage drop. This voltage drop can then be accurately measured using a digital multimeter. By adjusting the resistance of the resistor, it can be used to reduce the magnitude of voltage, current, and power that passes through it.

This type of device is commonly used in electronic circuits. It can be used to create small signal filtering, to reduce the magnitude of the signal, to attenuate it to prevent it from interfering with other components, and to provide biasing. It is also used in decoupling circuits, current limiting applications, and voltage regulation. Additionally, the LR0204F1K6 can be used in power supplies and to protect sensitive components from excessive current.

LR0204F1K6 has a wide variety of featuring including: power rating up to 0.6W , flat rated resistance, temperature and aging stability, and low noise output. It is designed to deliver a high level of accuracy as well. Its composition of materials has been carefully selected to ensure that the device is able to withstand high temperatures while also delivering high performance. Additionally, the through-hole design of the device also ensures that the assembly process is easy and fast.

The LR0204F1K6 is manufactured near-the-die through a combination of thin-film sputtering and laser trimming. The device is then mounted on a through-hole circuit board, after which the leads are soldered. This device is designed to have a low power consumption and a resistance linearity of a few hundred ohms. Thus, it is highly reliable when used in low current applications.

The LR0204F1K6 is an excellent choice when choosing a through-hole resistor for a variety of low current applications. It offers superior accuracy, stability, and reliability, while also allowing for easy and fast assembly. The device is also easy to mount on through-hole circuit boards.

The specific data is subject to PDF, and the above content is for reference