LR1F1K3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LR1F1K3 is an example of a through hole resistor, designed specifically for through hole components used on printed circuit boards. The LR1F1K3 has a wide range of applications, such as current sensing, voltage division, and frequency compensation in power supply, audio, and amplifier circuits, as well as other applications.

A through hole resistor is a component that is designed to provide specific resistance as part of a circuit. The LR1F1K3 is manufactured from a high-grade ceramic material and has two leads which provide electrical connection between the resistor and the circuit. The resistance value in ohms is marked on the body of the resistor for easy identification. The internal construction of the LR1F1K3 consists of a ceramic disc with four layers. These layers form the two resistive elements, along with two inner insulation layers and an outer protective coating.

The working principle of a through hole resistor is simple. The two resistive components are connected in series with each other, one at each end. When an electric current passes through the component, it encounters a resistance, and, depending on the configuration of the resistor, the current will either be increased or decreased as it passes through. In the case of the LR1F1K3, the resistors can be configured to either increase or decrease the current flowing through the component.

The LR1F1K3 is typically used in various types of amplifier circuits, such as high-power audio amplifiers, where it is used to prevent the output stage from being overloaded. The LR1F1K3 is also commonly used in audio and video applications, where it is used to provide frequency compensation for the circuit. In addition, the LR1F1K3 is used in current sensing applications, where it is used to measure the output current of the circuit. Finally, the LR1F1K3 can be used in voltage division applications, which require two resistive elements to be connected in parallel in order to reduce the overall voltage.

The LR1F1K3 has an operating temperature range of -55°C to +125°C, a power rating of 200mW, and a tolerance of ±5%. It has a maximum operating frequency of 100MHz and a maximum working voltage of 50V. It is also extremely small, with dimensions of just 0.100 x 0.100 x 0.100 inches.

In conclusion, the LR1F1K3 is a through hole resistor which has a wide range of applications in audio, power supply, voltage division, and current sensing circuits. It is manufactured from a high-quality ceramic material, and has a simple working principle which involves two resistive components connected in series or parallel.

The specific data is subject to PDF, and the above content is for reference