LR1F6R2 Resistors

Series:	LR, Neohm
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	6.2 Ohms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.091" Dia x 0.244" L (2.30mm x 6.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

LR1F6R2 Application Field and Working Principle

Through-hole resistors, also known as axial resistors, are one of the most common types of resistors found in electronic circuitry. They consist of a cylindrical body of an insulating material, such as ceramic or epoxy, with two bands of metal wire wound in an axial direction around the body. The bands of metal wires are connected at both ends to two terminals that extend from the body of the resistor.Through-hole resistors can be relatively inexpensive, and depending on the type of resistor material used, they can have relatively high resistance values (up to several megohms). Generally, they are used in electronic systems for signal resistance, noise reduction, voltage division, current limiting, and anti-surge protection.LR1F6R2 is a type of through-hole resistor which is also known as a patch-type resistor. It is composed of a metal oxide film that is applied on a ceramic plate. This type of through-hole resistor has the advantage of being able to operate under extreme temperatures. As a result, it can be used in applications where temperatures are as low as -55°C and as high as +150°C.The working principle of through-hole resistor is voltage division. As the name suggests, the voltage is applied across the resistor and is divided due to the presence of the resistor. The value of the resistor determines the amount of voltage that is dropped across it. When the voltage applied across the resistor is greater than the rated power of the resistor, the resistor will heat up due to the heat dissipated by the resistance. This heat is usually dissipated by convection, or in some cases, by using a fan.In conclusion, LR1F6R2 through-hole resistors are commonly used for signal resistance, noise reduction, voltage division, current limiting, and anti-surge protection purposes. This type of resistor has the advantage of being able to operate under extreme temperatures. The working principle of through-hole resistors is voltage division, and the amount of voltage dropped across the resistor depends on the value of the resistor itself.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description