Allicdata Part #: | 811-1807-5-ND |
Manufacturer Part#: |
LSN-T/10-D12-C |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Murata Power Solutions Inc. |
Short Description: | DC DC CONVERTER 0.75-5.25V 51W |
More Detail: | Non-Isolated PoL Module DC DC Converter 1 Output 0... |
DataSheet: | LSN-T/10-D12-C Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Output 3: | -- |
Size / Dimension: | 2.00" L x 0.34" W x 0.55" H (50.8mm x 8.6mm x 14.0mm) |
Package / Case: | 11-SIP Module, 10 Leads |
Mounting Type: | Through Hole |
Efficiency: | 96.5% |
Operating Temperature: | -40°C ~ 85°C |
Features: | -- |
Applications: | ITE (Commercial) |
Power (Watts): | 51W |
Current - Output (Max): | 10A |
Series: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 0.75 ~ 5.25 V |
Voltage - Input (Max): | 14V |
Voltage - Input (Min): | 10V |
Number of Outputs: | 1 |
Type: | Non-Isolated PoL Module |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used in many applications, including automotive, industrial, and consumer electronics such as laptops, cell phones, digital cameras, and game consoles. The most common type is the isolated DC-DC converter, which is able to reduce voltage from a higher to a lower one with a high level of isolation to protect both the power source and the load. The LSN-T/10-D12-C DC-DC converter is a non-isolated type. It is primarily used in low-power applications and helps reduce board space and lower the cost of the system.
The LSN-T/10-D12-C is a synchronous buck DC-DC converter with wide input voltage range. It operates with input voltages from 3.2 V to 24 V and provides a regulated 12 V output voltage with a maximum output current of 1A. The device can reach a peak efficiency of up to 95%. It offers low output voltage ripple and low noise performance. It also features over current, over voltage, and over temperature protection.
The device is comprised of an internal P-channel power MOSFET for the lower switch, an internal N-channel power MOSFET for the upper switch, and an internal integrated 600 V startup voltage detector. An external series diode is required for the device to start up. The control loop is managed by an internal error amplifier and a voltage feedback network. The voltage feedback network consists of a resistor divider connected from the output of the device to the input of the error amplifier. The voltage output is regulated by a current-mode PWM control loop.
The device can be used in a variety of applications, from motor drive controllers to power supplies, battery chargers, and point-of-load converters. It can also be used to step down the voltage from high-voltage sources such as solar cells or DC-DC converters with a wide input voltage range. It is especially useful in applications where low noise and high efficiency are critical, such as for medical devices.
In summary, the LSN-T/10-D12-C synchronous buck DC-DC converter is a high-efficiency device with wide input voltage range. It can reduce voltage from a higher to a lower one and provides low output noise and high efficiency. It is suitable for a variety of applications, from motor drive controllers to power supplies, battery chargers, and point-of-load converters. It is especially useful for medical device applications due to its low noise and high efficiency.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...