LTC1517CS5-3.3#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC1517CS5-3.3#TRPBF is a synchronous step-down switching regulator which is primarily used in distributed power distribution and voltage step-down applications. It is an integrated DC/DC converter with constant current output and wide input voltage capability covering a range from 0.8V to 6V, or up to 20V at 3.3V output.The device integrates two independent floating gate drivers in order to provide faster response and improved circuit operation, such as input voltage regulation, area and logic optimization.The device is a synchronous buck regulator, ideal for distributed power systems, where the input voltage may vary widely, or for point-of-load applications.It is capable of providing up to 15A of output current with a maximum dropout voltage of only 0.5V.

The LTC1517CS5-3.3#TRPBF features an adaptive circuit which provides fast and easy current-mode control by automatically switching the gate drive frequency between two ranges, depending on the load requirements. This provides fast response and improved efficiency over a wide load range.The device also integrates a fault management circuit, which can be used to detect external over-current or short-circuit conditions and trigger an internal current limit so that the device can safely protect the downstream system. Additionally, the device features an over-voltage protection circuit which detects any output voltage spikes and triggers an output clamp. This helps to protect the device from damage due to output voltage surges or overloads.

The operation of the LTC1517CS5-3.3#TRPBF is based on the switching of two MOSFETs, one at the input and one at the output, to perform the voltage step-down conversion. During operation, the switching mechanism of the MOSFETs is controlled via a two-stage control circuit, which includes a oscillator running at a determined frequency, and a driver circuit with two separate gates. The oscillator sets the frequency of the switch, while the driver circuit provides the necessary switching pulses to control the gates.

Once the input and output lines are connected and the input voltage is detected, the oscillator will start and the driver circuit will trigger pulse-width-modulated (PWM) signals to the gates, causing the two MOSFETs to switch. The current will be fed from the input to the output, generating the desired output voltage. The switching frequency can be adjusted in order to obtain the desired output voltage. The device also features a dynamic-response circuit that controls the current-mode switching, which helps to minimize the peak input current and thereby improving the efficiency of the system.

In addition to its outstanding performance, the LTC1517CS5-3.3#TRPBF also provides several additional features. It includes a low current standby mode which allows the device to enter into a low power state whenever the device is not in active operation. It also includes an adjustable soft-start, which helps to reduce inrush current during startup, and a temperature shutdown protection which will automatically disable the device whenever the power stage exceeds a certain temperature.

In conclusion, the LTC1517CS5-3.3#TRPBF is a powerful and efficient switching regulator ideal for distributed power systems. Its wide input voltage range and fast response make it suitable for a broad range of applications. Additionally, its features such as fault detection, temperature shutdown, and soft-start circuits, makes it an ideal solution for point-of-load applications.

The specific data is subject to PDF, and the above content is for reference