LTC1799IS5#TRMPBF Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC1799IS5#TRMPBF is an oscillator circuit and has multiple options available to make it suitable for various applications. The oscillator package has pins for power and ground, an initial oscillating frequency setpoint (potentially adjustable with a trimmer or pull up resistor) and a tri-state output pin. Its size and power requirements make it suitable for a wide range of applications.

The internal oscillator can be powered by an input voltage of 3V to 15V, making it suitable for most types of sources. In addition, the oscillator circuit allows up to 25MHz of frequency stability over a wide range of temperatures. It also features an internal pull-up resistor, to provide a smooth response to changes in frequency over temperature. Also, the internal oscillator can be disabled using a trimmer control.

The oscillator circuit is primarily used in the timing and monitoring of electronic equipment such as televisions, computers, and other electronic devices. The speed of the oscillator can be changed to meet a specific application requirement. It can also be used for a range of other applications such as clock synchronization, voltage regulation, and powering a variety of electronic components such as processors and digital logic switches.

Working principly, the oscillator cores consists of capacitors and resistors with a fixed frequency set point. A voltage is applied across the core, which determines the frequency of the oscillations. An external control can be used to increase or decrease the frequency of the oscillations, or to switch the oscillator on or off.

In order to maintain a stable frequency, the oscillator uses various feedback and control mechanisms. These include a feeder capacitor, a dampening resistor and an optional external resistor. The capacitor provides a further stabilization of the frequency output. The optional external resistor is used to adjust the frequency if necessary.

The oscillator is threaded for temperature stability by using a temperature compensation resistor. This resistor can pull the capacitor voltage up or down, depending on the surrounding temperature. This helps to keep the frequency stable over a wide range of temperatures.

The oscillator is then connected to a tri-state output pin, which allows the oscillator to be turned off, if necessary. This is done by allowing the oscillator to be activated by either a mechanical or electrical signal. When the electrical or mechanical signal is removed, the oscillator is turned off and the tri-state output pin goes to the ‘high’ state.

The application of the LTC1799IS5#TRMPBF oscillator ranges from clock synchronization in laptops and desktops to timing and control in various other kinds of systems. It is also used in embedded systems, medical equipment, and audio equipment. As it consumes very low power, it can be used as a battery backup clock in portable devices and can also be used in low power circuits.

In conclusion, the LTC1799IS5#TRMPBF clock/timing programmable timer and oscillator is a versatile and powerful device that has a wide application range. Its ability to maintain a stable frequency across a wide temperature range, low power requirements and ability to be adjusted externally make it a highly desirable oscillator for timing and monitoring purposes.

The specific data is subject to PDF, and the above content is for reference