LTC2607CDE-1#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC2607CDE-1#TRPBF is a precision digital-to-analog converter (DAC) with excellent linearity and signal-to-noise ratio. It belongs to data acquisition, as digital signal needs to be changed into analog signal for further process.

The LTC2607CDE-1#TRPBF is a single-channel, 16-bits low-power, rail-to-rail DAC, and offers up to +2.5V of output range, with a settling time of 44 μs and inherent monotonicity. It is available in small package options, making it suitable for a wide range of applications.

The LTC2607\'s main features include excellent linearity: INL –1.75 LSB, DNL –0.5 LSB max, low power consumption: 0.9 mW to 4.3 mW, Integrated EEPROM programmable linearization and output drift corrections.

The application field of LTC2607CDE-1#TRPBF includes automotive and handheld instrumentation, telecom infrastructure and Li-Ion battery tracking. This device can be used in consumer audio to improve system linearity and audio quality, in light detection and ranging (LIDAR) system, to minimize transceiver systems error, and in wide variety of industrial measurement and control components.

The working principle of the LTC2607CDE-1#TRPBF is straightforward. The device is operated from a single +2.7V to +5.5V analog power supply, and a single 0V to 5V digital supply. The data stream out from the digital side of the device is then converted into an analog voltage by the DAC, which passes through an output filter to eliminate its out-of-band noise contents.

The linearity of the output is achieved by using high-precision references and an integrated EEPROM that stores correction registers for each channel. These correction registers allow the DAC to achieve ±0.25 LSB of INL accuracy. The gain and offset errors are also corrected with the EEPROM.

The settling time is relatively short, allowing high frequency data outputs and allowing the DAC to switch between different digital codes in 44 μs. The power consumption can be reduced to 0.9 mW when powered through digital ground pin, or 1.9 mW, when powered with digital power pin.

Finally, the LTC2607CDE-1#TRPBF also supports hot-swapping and power supply reversal protection, making it a durable and reliable device for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference