LTC2631AITS8-HZ12#TRMPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) are specialized devices used to convert digital data into analog data. LTC2631AITS8-HZ12#TRMPBF is a high-performance, low power single channel 8-bit digital-to-analog converter (DAC). It features an unipolar full-scale output voltage range of 0 to 2.5V, wide supply voltage range, high input impedance, and low output impedance.

The upper 6 bits of the DAC are directly connected to the configuration register. The lower two bits are attached to the output range select pin. The three-state configuration register enables the user to select the output range and the enable functionality independently of the data. The enable control allows the device to be shut off between conversions, minimizing power consumption.

The device has a latency of 6 clock cycles plus the enable time. Power consumption of the device is minimized with an active low power-down mode and by using an efficient serial interface during data transfer. It supports a wide range of digital inputs such as SCLK and SCI, which enable the use of the device in multiple applications.

The features of LTC2631AITS8-HZ12#TRMPBF make it suitable for applications such as robotics, industrial controls, telecommunications, semiconductor test equipment, and portable instruments. It can be used in systems that require high resolution and accuracy, such as loop controllers, servo controllers, and audio systems. Because of its high resolution, it is also ideal for medical and laboratory equipment.

The basic operation of LTC2631AITS8-HZ12#TRMPBF involves the receipt of 8-bit digital information, conversion of the digital information to an analog voltage level and the output of the analog voltage level. The output voltage is determined by the 8-bit data presented to the input of the device. The analog voltage output range is 0V to 2.5V.

The device has two inputs and an output. The inputs are divided into a digital input, an analog input and an enable input. The digital input receives the 8-bit data from a microprocessor or controller. The analog input is used to calibrate the device and is used for setting the full-scale output voltage. The enable input is used to enable and disable the device.

When the DAC is enabled, the 8-bit digital input data is converted to an analog voltage at the output. This is accomplished by using an internal current-source ladder circuit, configured as a resistor ladder network. The analog output voltage is proportional to the digital input code. The device has an internal DAC gain control that ensures the output voltage is linearly proportional to the digital code.

The output voltage range can be adjusted externally by the use of an external voltage reference or an internal range selection pin, allowing a full-scale output range of 0V to 2.5V. The device has a monotonicity over temperature of 8-bits, making it ideal for systems that need a high degree of accuracy. The output is also glitch free and is capable of providing high frequency signals.

In conclusion, LTC2631AITS8-HZ12#TRMPBF is a high-performance, low power single channel 8-bit Digital-to-Analog Converter (DAC). It can be used in applications such as robotics, industrial controls, telecommunications, semiconductor test equipment, and portable instruments. The features of this device, such as its high resolution, low power consumption, wide supply voltage range, and high input impedance, make it an ideal fit for many applications.

The specific data is subject to PDF, and the above content is for reference