LTC2633CTS8-HI10#TRMPBF

Reference Type:	External, Internal
Base Part Number:	LTC2633
Supplier Device Package:	TSOT-23-8
Package / Case:	SOT-23-8 Thin, TSOT-23-8
Operating Temperature:	0°C ~ 70°C
Architecture:	--
INL/DNL (LSB):	±0.2, ±0.5 (Max)
Voltage - Supply, Digital:	5V
Voltage - Supply, Analog:	5V
Series:	--
Data Interface:	I²C
Differential Output:	No
Output Type:	Voltage - Buffered
Settling Time:	4µs (Typ)
Number of D/A Converters:	2
Number of Bits:	10
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to LTC2633CTS8-HI10#TRMPBF

The LTC2633CTS8-HI10#TRMPBF is a digitally-programmable potentiometer (DPOT) family from Linear Technology Corporation (LTC). It includes a two-wire interface that allows an external processor to set the output of a 10-turn resistor. This DPOT family has 8-bit resolution and is offered in a compact 8-lead SSOP package. The LTC2633CTS8-HI10#TRMPBF is a versatile and highly accurate device that enables a wide range of applications.

Application Field and Working Principle of LTC2633CTS8-HI10#TRMPBF

As a data acquisition (DAQ) digital-to-analog converter (DAC), the LTC2633CTS8-HI10#TRMPBF can be used to control and measure analog voltages with 10-turn resolution. It is designed to provide an efficient and cost-effective solution for applications such as motor speed control, power amplifiers, process control and various on/off signals where accuracy is critical.The LTC2633CTS8-HI10#TRMPBF is a bipolar device that uses a feedback loop to adjust the output voltage. The two-wire interface allows the external processor to select the desired output level by writing a 10-bit word to the device. The data sent by the processor is sent through the SDATA and SCLK pins and is used as the input of the device. The output voltage is then calculated by a feedback circuit that compares the desired level of the output to the actual level. This feedback loop is used to adjust the output voltage to the programmed level.The device uses an internal non-volatile memory to store the programmed voltage level, so it is not affected by power loss. The device can be programmed with two different types of operation: a single-step mode, where the voltage is set in a single step, or a single-byte mode, where the voltage is adjusted in small increments of 8 bits.

Conclusion

The LTC2633CTS8-HI10#TRMPBF is a highly accurate, digitally-programmable potentiometer that enables a wide range of applications. It is a versatile, cost-effective solution for applications where accuracy and precision are critical. The 10-turn resolution provides a high degree of granularity, and the two-wire interface allows for easy programming. The device is ideal for applications such as motor speed control, PA control, process control, and various on/off signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description