LTC2637IDE-HZ8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC2637IDE-HZ8#TRPBF, a high-performance Digital-to-Analog Converter (DAC) from Analog Devices, is an ideal choice for a wide range of applications—ranging from power management, motor control and "smart" safety systems to industrial automation and embedded microcontroller designs. LTC2637IDE-HZ8#TRPBF provides a high level of integration with 10-/12-bit resolution, and offer excellent performance in terms of noise, settling time, accuracy and power consumption. It enables simultaneous operation of up to eight DACs in a single package.

The LTC2637IDE-HZ8#TRPBF DAC can be used in various systems ranging from voltage-setting, current and temperature measurement and control to audio, digital video, data acquisition and communications systems. Its wide operating range and low power consumption make it a good choice for use in battery-operated systems, where power must be minimized.

The LTC2637IDE-HZ8#TRPBF offers an extended temperature range of -40°C to +85°C and features an array of features that include dual-voltage analog outputs 0V to 2.5V and 0V to 5V, dual-voltage reference inputs 0V to 5V and 0V to 10V, and single-voltage reference input 0.5V to 10V; power-on reset; and multi-channel synchronization.

The DAC operates in 8 channels and has an I2C-based digital interface. The I2C bus enables up to eight devices to be connected at the same time. It is capable of transmitting and receiving data with a maximum data rate of 400kbit/s in fast-mode or 100kbit/s in standard mode. The serial interface enables the DAC to be programmed without the need for software drivers, allowing for asynchronous operation.

When it comes to working principle, the DAC consists of two parts: an R-2R network, consisting of resistors matched in ratios of two-to-one, and a digital-to-analog converter (DAC). The R-2R network is made of precision resistors that are connected to the DAC inputs. The digital input signal is connected to a "D" input of the R-2R network and its complementary signal is connected to a "Not D" input of the R-2R network. The output of the R-2R network is connected to the DAC input.

The DAC works by comparing the analog input voltage to a voltage reference. This comparison is used to calculate the output voltage value. When the analog input voltage changes, the output voltage is adjusted accordingly by using the .compensated voltage reference. The LTC2637IDE-HZ8#TRPBF supports up to 10-bit resolution, providing a wide range of resolutions for different applications.

The LTC2637IDE-HZ8#TRPBF is a robust and versatile device that enables a variety of applications with its range of high-resolution digital-to-analog converters. In addition to the wide range of available resolutions, it offers fast settling time and low power consumption. With its multi-channel synchronization and I2C-based serial interface, it can be easily incorporated into a variety of applications.

The specific data is subject to PDF, and the above content is for reference