LTC2655CUF-H12#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC2655CUF-H12#TRPBF is a digital-to-analog converter (DAC) that is capable of converting digital data to analog output voltages. This device operates on the Serial Input/Output (SIO) bus which is bus-based communication driver that provides data transmission over a single serial data line. It is designed to offer a flexible nanoDAC architecture with a variety of features for system designers. The components boast a wide range of features such as a 12-bit resolution, 2.5V to 5.5V operation, high accuracy and low noise, a low quiescent current of 5mA, temperature range of -40°C to +85°C, output voltage range of 0 to Vref, and an input I²C or SPI interface.

The LTC2655CUF-H12#TRPBF is ideally suited for use in applications such as data logging, data acquisition systems, automotive and industrial control, communications systems, consumer electronics, and medical equipment. The output voltage of the device ranges from 0V to the reference voltage, VREF. The duty cycle of the output waveform can also be adjusted to generate waveforms with different duty cycles. The device is used to generate waveforms for testing or calibration of different systems.

In terms of its working principle, the device works by setting the output voltage of the DAC to the desired value. The device is programmed using the serial interface SIO bus. The input to the device is latched by using the two address bits A0 and A1. The analog output is generated using a 12-bit noise-free Digital-to-Analog Converter (DAC) with a voltage reference of 1.2V. This output is then filtered to reduce any spurious noise components.

The output voltage of the device is programmed to the desired value using the SIO bus. This can be done by sending a 6-byte serial command to the device, which then sets the output voltage in the programmed range of 0V to VREF. This serial command is formed of three parts: a start byte, command byte, and a 16-bit data word. The start byte is a burst of pulses on the SIO line that signals that a serial command is being received. Then, the command byte is followed by the 16-bit data word. This word includes the address bits A0 and A1, as well as the 12-bit output code, which is used to set the output voltage.

The LTC2655CUF-H12#TRPBF digital-to-analog converter is a powerful device that can be used in many applications. With its high accuracy, low noise, and wide range of features, it provides designers with a versatile option for their data acquisition and control applications.

The specific data is subject to PDF, and the above content is for reference