LTL-42M7NMHDP1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LEDs (Light Emitting Diodes) are widely used components in a variety of power controls, signaling, and indicators. One such LED product is the LTL-42M7NMHDP1, which is a circuit board indicator and a combination of arrays, bars and bar graphs.

Uses

The LTL-42M7NMHDP1 LED is most commonly used in applications that require low operating current and a specific choice of color. This particular LED can be used in a few different environments and applications. These areas include industrial conveyor controls, medical and consumer displays, automotive, military and aerospace components.

The device is popular for its ability to provide versatile, reliable and conscientious illumination in a variety of situations. This LED type can be used in situations such as backlighting air conditioning controls, status indication to call attention to certain tasks, or providing continuity to on and off operations.

Benefits

The LED’s low current operating requirement helps make it an attractive choice for applications where current draw is critical. Additionally, the LED offers higher reliability and long life due to its low internal resistance and higher efficiency. The LED is evenly illuminated with the same color at various illumination angles. It also has a wide operating temperature range, meaning it is well-suited for environments that are subject to extreme temperature fluctuations.

The LTL-42M7NMHDP1 can be mounted in a variety of different ways, including through-hole, surface mount, and panel mount. Additionally, the device’s smaller size and low operating current makes it suitable for use in portable electronics or medical applications.

Working Principle

The LTL-42M7NMHDP1 LED operates using the binary principle, which states that an electrical charge placed in a semiconductor device turns a light on and off. In other words, the voltage determines whether or not a given circuit is closed or open. When the voltage is applied, a current flows in the circuit and the LED begins to illuminate.

When the current is removed, the charge is no longer applied and the circuit turns off. This simple binary principle has made the LED extremely popular, as it can be powered from a DC source allowing for a variety of control applications.

Limitations

One of the drawbacks of the LTL-42M7NMHDP1 LED is that it is often susceptible to electrical noise. This can cause the light to flicker or “flare”, which can be distracting and can interfere with the desired operation. Additionally, this LED type requires a higher forward bias voltage than other LED types, so if the voltage falls below the LED’s specified value, it may not light up.

The LED’s smaller size also limits the angle viewing to a maximum of 120°, which can make it difficult to be seen from a distance. Additionally, the heat generated by the LTL-42M7NMHDP1 should be taken into consideration, as the LED may overheat and burn out if not properly cooled.

Conclusion

The LTL-42M7NMHDP1 LED is a popular choice for a variety of applications due to its low current operating requirement and its ability to provide reliable, conscientious illumination in a variety of situations. Its versatile mounting options and wide operating temperature range make it suitable for use in industrial conveyor controls, medical and consumer displays, automotive, military and aerospace components.

However, the LTL-42M7NMHDP1 should be used with caution, as it is susceptible to electrical noise and has a limited viewing angle. Additionally, the device should be properly cooled to prevent overheating and burnout.

The specific data is subject to PDF, and the above content is for reference