LTV-358T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An optoisolator, also called an optoelectronic isolator or a photocoupler, is an electronic component that transmits electrical signals between two isolated circuits using light. Optoisolators come in a variety of forms, including photovoltaic, phototransistor, and photoconductor. The LTV-358T is an optoisolator with a phototransistor output. It is commonly used in industrial applications, such as motor speed control and analog-to-digital conversion.

The LTV-358T is a surface-mount component with an encapsulated package. The package consists of an infrared light-emitting diode (LED) and a phototransistor mounted in a molded plastic body. The LED is the sending device, and the phototransistor is the receiving device. When the LED is activated by a current, it emits an infrared light. This infrared light is then detected by the phototransistor, which in turn transmits an electrical current.

In general, the LTV-358T offers a very good isolation voltage, which is typically up to 5000 VAC. This allows the optoisolator to be used in a variety of control circuits, such as power supplies, motor controllers, and temperature probe controllers. As the rated input power is 5 mA, it can be used for relatively low-power applications. In addition, the optoisolator has a low leakage current and a wide operating temperature range, which makes it suitable for a range of industrial applications.

The LTV-358T has several distinct advantages compared to other optoisolators. Firstly, it has better noise rejection compared to traditional transformers. Additionally, it offers a much higher current transfer ratio, which makes it suitable for control circuits where the signals need to be amplified. Finally, as it has a higher viability than traditional transformers, it can be used in temperature sensitive or highly volatile applications.

The working principle of the LTV-358T is quite simple. When a current is applied to the LED, it emits an infrared light, which is detected by the phototransistor. This triggers the phototransistor to conduct, allowing current to flow through the device. This current is then passed through the load, and the desired signal is outputted.

Due to its easy-to-implement design, the LTV-358T has become one of the most popular optoisolators available. It can be used in a variety of industrial applications, including motor speed control, analog-to-digital conversion, and power supply monitoring. Its high current transfer ratio, low leakage current, and wide operating temperature range make it an ideal choice for industrial applications.

The specific data is subject to PDF, and the above content is for reference