Allicdata Part #: | LTV-725V-ND |
Manufacturer Part#: |
LTV-725V |
Price: | $ 0.20 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISO 5KV DARL W/BASE 6DIP |
More Detail: | Optoisolator Darlington with Base Output 5000Vrms ... |
DataSheet: | LTV-725V Datasheet/PDF |
Quantity: | 1000 |
5005 +: | $ 0.17546 |
Output Type: | Darlington with Base |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -25°C ~ 100°C |
Vce Saturation (Max): | 1.2V |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 150mA |
Voltage - Output (Max): | 300V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 100µs, 20µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 15000% @ 1mA |
Current Transfer Ratio (Min): | 1000% @ 1mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators - Transistor, Photovoltaic Output are electronic components used as a form of protective insulation between two circuits, which are connected but either operate at different voltages or communicate using different signal levels. Generally, they contain a light source that emits light when an input voltage is applied that allows the optoisolator to detect an electrical signal at one end, and pass it through in a pristine, undistorted form at the other. The LTV-725V is an example of this type of device.
The LTV-725V optoisolator is a versatile 4-pin device that has a transistor, photovoltaic output. The unit offers a wide range of input-output combinations, making it highly applicable for a variety of applications. It also offers a high isolation voltage of up to 4500Vrms, which is more than enough to ensure electrical noise from one side is not interfering with the other. This makes the LTV-725V suitable for use in controlling high voltage circuits and isolating low voltage signals from high voltage systems.
The main working principle behind the LTV-725V optoisolator is light-based detection and switching. It consists of an input driver and an optically coupled output transistor. When an input voltage is applied, it causes current to flow through the light-emitting diode, which generates light. This light is then detected by the phototransistor on the other end, which causes a current to flow through it. This current triggers the output transistor, and switches on the resulting current. This in turn switches on and off a variety of connected circuits and devices, depending on the output requirement.
The LTV-725V offers a wide range of applications, making it suitable for projects that involve motion control, communication, automation, and security systems. It can be used to control electric motors, switching of lights and alarms, data transmission, and sound systems. It is also highly applicable for industrial automation equipment, such as high-speed pick and place systems, robotics, and industrial sensors.
In general, the LTV-725V optoisolator is an extremely versatile and reliable device that is suitable for a variety of applications. It is a 4-pin component that offers a wide range of input-output combinations, and a high isolation voltage that make it ideal for controlling high voltage circuits and isolating low voltage signals from high voltage systems. Its light-based detection and switching principle makes it highly applicable for use in motion control, communication, automation, and security systems.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...