Allicdata Part #: | LTV-733-ND |
Manufacturer Part#: |
LTV-733 |
Price: | $ 0.15 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISO 5KV TRANS W/BASE 6DIP |
More Detail: | Optoisolator Transistor with Base Output 5000Vrms ... |
DataSheet: | LTV-733 Datasheet/PDF |
Quantity: | 1000 |
2015 +: | $ 0.13230 |
Output Type: | Transistor with Base |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -30°C ~ 100°C |
Vce Saturation (Max): | 200mV |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 35V |
Series: | -- |
Input Type: | AC, DC |
Rise / Fall Time (Typ): | 4µs, 3µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 300% @ 1mA |
Current Transfer Ratio (Min): | 20% @ 1mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LTV-733 is a type of optoisolator, which isolates electrical signals between two circuits using light rather than electrical signals to transfer signal or data. Optoisolators are commonly used to connect electronic circuits that need to be electrically isolated, such as two circuits that use different power sources and cannot be connected directly. In this article, we will discuss the application field and working principle of the LTV-733.
Application Field:
The LTV-733 is a transistor-type optoisolator consisting of photoconductor-based optical couplers. It is an appropriate choice for a variety of applications including insulation, switching, load control, analog and digital signal transmission, signal conversion, frequency conversion, and voltage conversion. It can also be used for electromagnetic interference protection, DC-3.3V microcomputer interface switch control, and motor drive.
The LTV-733 is ideal for use in any system that relies on insulation, such as between two circuits. It can also be used for signal conversion and isolation in both low-voltage and high-voltage motors and switches. This optoisolator is well-suited for use in automotive, medical, lighting, and other applications that require optical isolation.
Working Principle:
The LTV-733 optoisolator is a transistor-type optical coupler that consists of one LED light emitter and one photoconductive-based detector. The light emitter produces light pulses that are then converted by the photoconductor into electrical signals. The electrical signals are then amplified by the detector and used to control the operation of the optoisolator.
When a voltage is applied to the optoisolator, the LED light emitter produces light pulses that are then converted by the photoconductor into electrical signals. These electrical signals are then amplified by the detector and used to activate the output of the optoisolator. This output can be used to control the operation of the system.
The LTV-733 optoisolator is a reliable and efficient device that provides excellent electrical isolation between different circuits. It is an ideal choice for electrical isolation applications as it is able to provide isolation even at higher voltages. Additionally, its small form factor makes it suitable for a variety of applications and its switching speeds make it suitable for a number of digital-signal related tasks.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...