Allicdata Part #: | LTV-733S-TA-ND |
Manufacturer Part#: |
LTV-733S-TA |
Price: | $ 0.14 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISO 5KV TRANS W/BASE 6SMD |
More Detail: | Optoisolator Transistor with Base Output 5000Vrms ... |
DataSheet: | LTV-733S-TA Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.12678 |
Output Type: | Transistor with Base |
Supplier Device Package: | 6-SMD |
Package / Case: | 6-SMD, Gull Wing |
Mounting Type: | Surface Mount |
Operating Temperature: | -30°C ~ 100°C |
Vce Saturation (Max): | 200mV |
Current - DC Forward (If) (Max): | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 35V |
Series: | -- |
Input Type: | AC, DC |
Rise / Fall Time (Typ): | 4µs, 3µs |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 300% @ 1mA |
Current Transfer Ratio (Min): | 20% @ 1mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LTV-733S-TA is an optoisolator featuring a transistor photovoltaic output. This type of optoisolator splits two electrical circuits from one another, allowing one circuit to control the other safely and without direct electrical connection. It\'s mainly used in signal transmission, signal isolation, and noise suppression applications.
Functionally, the LTV-733S-TE consists of an infrared light-emitting diode (LED) and a phototransistor, with both devices placed in the same package. It isolates signal paths with very high efficiency, even up to 3000Vac, resulting in greater safety and reliability for users. The optoisolator also offers a very low quiescent voltage, which reduces heat generated by transistors in sensitive circuits.
In order to use the LTV-733S-TA, the input of the LED must be connected to the output of the driver circuit, while the output of the phototransistor needs to be connected to the load circuit. When an electrical signal is generated in the input, the current causes the LED to emit light. This light energy is received by the phototransistor and converted into an electrical signal. This signal is passed to the load circuit, thereby controlling it indirectly. This principle allows the LTV-733S-TA to act as a signal isolator, essentially allowing one circuit to control the other without direct physical connection.
The advantages of the LTV-733S-TA optoisolator are that it features no additional components, a wide operating voltage (from 2.7V to 36V), a direct signal transmission, and a high insulation strength. These characteristics make this optoisolator suitable for use in signal transmission applications, such as telecommunications, industrial automation, and aerospace. It can also be used in noise suppression in power line circuits, and other applications where noise isolation is required.
The LTV-733S-TA optoisolator can be used to achieve signal transmission between two separate circuits, while providing a high level of insulation and signal reliability. The device’s small size and high efficiency make it a great choice for a variety of systems where a compact solution is needed. It features a wide range of operating voltages and provides a stable and secure mechanism for isolating signals from one device to another.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...