LTV-814HM

Output Type:	Transistor
Supplier Device Package:	4-DIP
Package / Case:	4-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-30°C ~ 100°C
Vce Saturation (Max):	200mV
Current - DC Forward (If) (Max):	150mA
Voltage - Forward (Vf) (Typ):	1.4V
Current - Output / Channel:	80mA
Voltage - Output (Max):	35V
Series:	--
Input Type:	AC, DC
Rise / Fall Time (Typ):	4µs, 3µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	80% @ 100mA
Current Transfer Ratio (Min):	20% @ 100mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic OutputOptoisolators are devices that use light as a means of electrically isolating two circuits. They are typically used when two systems, like digital and analog, need to be connected but must not interact in any way. Among them, the transistor photovoltaic output (TPO) optoisolator is an important class of device that provides electrical isolation between two systems, as well as signal transfer between the two.The most common TPO optoisolator is the LTV-814HM, made by Lite-On Technology Corporation. It is a four-pin dual-in-line package that comes in three versions: unipolar, bipolar, and MOSFET switch. It is designed for a wide range of applications, including low-voltage, industrial, and consumer electronics. The optoisolator can also be used in various applications, such as automotive systems, control circuits, power supplies, and instrumentation.The LTV-814HM optoisolator works by using a light-emitting diode to create an optical signal which is then sent to an output transistor. This output transistor is connected to the other side of the optoisolator, allowing electric signals to be transmitted between the two circuits. The transistor is designed to be completely isolated from the input circuit, so that calculations and measurements can be safely performed on both sides.The optoisolator is designed to allow DC and AC signals to pass through, with minimal signal distortion. The device has an open-collector output, meaning it has two possible output states: on or off. This allows it to be used in a wide range of systems, including automotive, industrial, and consumer electronics. It can also be used in a variety of applications that require precise remote control or monitoring of data.The LTV-814HM optoisolator has a wide range of features and advantages, such as a wide operating temperature range, able to operate from -55ºC to 105ºC. It also features reverse voltage protection, over-voltage protection, transient protection, and is RoHS compliant. It is also designed to be robust, with a working life of up to 100 million operations.Overall, the LTV-814HM optoisolator is a highly versatile device that allows two circuits to be connected and isolated while still allowing data to be transmitted between them. Its wide variety of features and advantages make it an ideal choice for a variety of applications, from automotive and industrial to consumer electronics.

The specific data is subject to PDF, and the above content is for reference