Allicdata Part #: | LTV-815S-TA1-ND |
Manufacturer Part#: |
LTV-815S-TA1 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISOLTR 5KV DARLINGTON 4-SMD |
More Detail: | Optoisolator Darlington Output 5000Vrms 1 Channel ... |
DataSheet: | LTV-815S-TA1 Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Number of Channels: | 1 |
Voltage - Isolation: | 5000Vrms |
Current Transfer Ratio (Min): | 600% @ 1mA |
Current Transfer Ratio (Max): | 7500% @ 1mA |
Turn On / Turn Off Time (Typ): | -- |
Rise / Fall Time (Typ): | 60µs, 53µs |
Input Type: | DC |
Output Type: | Darlington |
Voltage - Output (Max): | 35V |
Current - Output / Channel: | 80mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - DC Forward (If) (Max): | 50mA |
Vce Saturation (Max): | 1V |
Operating Temperature: | -30°C ~ 100°C |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Gull Wing |
Supplier Device Package: | 4-SMD |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are an important component for ensuring reliable signal transmission without compromising safety or signal accuracy. The LTV-815S-TA1 optoisolator is a transistor photovoltaic output device that uses light to transmit signals between two isolated circuits. It is designed to isolate a low-level input signal from a higher-level output signal.
The LTV-815S-TA1 has a wide range of applications, from automotive control systems, to low-power LED backlighting in consumer electronics and lighting, to industrial instrumentation. In automotive applications, it is used to safely transmit signals between different voltage levels in the vehicle. In consumer electronics, its low-power design is ideal for LED backlighting applications. It is also used in lighting systems where it is important to correctly interpret the presence or absence of light. Finally, it is used in industrial instrumentation for testing and analysis, as it can reliably detect signals that are too weak for standard electronic components to detect.
The working principle of the LTV-815S-TA1 optoisolator is quite simple. When a current is applied to the input, a light-emitting diode (LED) emits light. This light is then detected by the optoisolator’s phototransistor, which converts the light into an electrical output signal. The light intensity can be adjusted using the optoisolator’s potentiometer, so that any given input and output voltage level can be matched.
The LTV-815S-TA1\'s high isolation voltage ensures that it can safely transmit signals between two isolated circuits without any risk of interference or signal degradation. It is available in a package size of just 5.2mm x 3.8mm x 1.6mm, making it a compact and reliable choice for a variety of applications. Additionally, the optoisolator has a low power consumption of just 5 mW, making it an efficient device requires minimal power from the power source.
The LTV-815S-TA1 optoisolator is an efficient and reliable device that can provide accurate signal transmission between two circuits with a wide range of voltage levels. Its small size, low power consumption, and high isolation voltage make it an ideal choice for applications where accurate signal transmission and electrical safety is required.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...