Allicdata Part #: | LTV-817S-TA1-D-ND |
Manufacturer Part#: |
LTV-817S-TA1-D |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISOLATR 5KV TRANSISTOR 4-SMD |
More Detail: | Optoisolator Transistor Output 5000Vrms 1 Channel ... |
DataSheet: | LTV-817S-TA1-D Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Number of Channels: | 1 |
Voltage - Isolation: | 5000Vrms |
Current Transfer Ratio (Min): | 300% @ 5mA |
Current Transfer Ratio (Max): | 600% @ 5mA |
Turn On / Turn Off Time (Typ): | -- |
Rise / Fall Time (Typ): | 4µs, 3µs |
Input Type: | DC |
Output Type: | Transistor |
Voltage - Output (Max): | 35V |
Current - Output / Channel: | 50mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - DC Forward (If) (Max): | 50mA |
Vce Saturation (Max): | 200mV |
Operating Temperature: | -30°C ~ 110°C |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Gull Wing |
Supplier Device Package: | 4-SMD |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.Optoisolators are solid-state electrical components. They provide electrical isolation between two circuits by using light to isolate signals instead of wires. One of the popular optoisolators is the LTV-817S-TA1-D. This device has a photovoltaic output transistor and is typically used in power monitoring applications.
A typical application of the LTV-817S-TA1-D is in industrial power monitoring circuits. It is used to monitor the state of a power source such as AC or DC voltage, current, or temperature. When the power source is connected to the LTV-817S-TA1-D, the optoisolator will detect the presence or absence of the power source and will generate an appropriate output signal.
The working principle of the LTV-817S-TA1-D is based on the transfer of light between two photodiodes. A light-emitting diode (LED) is used as a source of light which is focused on the front photodiode. The rear photodiode is connected to the output transistor. When the input power source is connected to the LTV-817S-TA1-D, the LED will be energized and the light will be detected by the rear photodiode, which will then turn on the output transistor. The output transistor will then respond to the detected light and generate the appropriate output signal.
The LTV-817S-TA1-D optoisolator is a useful device for industrial applications. It is reliable, cost-effective, and easy to use. It provides excellent electrical isolation between the input and output circuits and is capable of monitoring and responding to changes in the input power source. This makes the LTV-817S-TA1-D an ideal choice for applications where high reliability and low cost are important considerations.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...