Allicdata Part #: | 160-1352-5-ND |
Manufacturer Part#: |
LTV-824H |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Lite-On Inc. |
Short Description: | OPTOISOLATOR 5KV 2CH TRANS 8-DIP |
More Detail: | Optoisolator Transistor Output 5000Vrms 2 Channel ... |
DataSheet: | LTV-824H Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Number of Channels: | 2 |
Voltage - Isolation: | 5000Vrms |
Current Transfer Ratio (Min): | 20% @ 100mA |
Current Transfer Ratio (Max): | 80% @ 100mA |
Turn On / Turn Off Time (Typ): | -- |
Rise / Fall Time (Typ): | 4µs, 3µs |
Input Type: | AC, DC |
Output Type: | Transistor |
Voltage - Output (Max): | 35V |
Current - Output / Channel: | 80mA |
Voltage - Forward (Vf) (Typ): | 1.4V |
Current - DC Forward (If) (Max): | 150mA |
Vce Saturation (Max): | 200mV |
Operating Temperature: | -30°C ~ 100°C |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Supplier Device Package: | 8-DIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LTV-824H is a type of optoisolator with a transistor and photovoltaic output. These devices are used to provide isolation between two circuits and to protect sensitive electronics by driving an output transistor. They provide a high degree of electrical insulation between two circuits that do not share a common ground or power supply.
The LTV-824H is made up of a source and photo-detection component. The source component is made up of an infrared light-emitting diode (LED) and is powered by an external voltage. Light from the LED is directed toward the detection component, which contains an optically sensitive transistor. The optically sensitive transistor is sensitive to the light emitted by the LED and switches as the amount of light changes. As the current of the LED increases, the current through the transistor increases, resulting in a higher output voltage.
The LTV-824H has a wide range of applications in industry. It is often used as an input to a control system for a variety of applications. It can be used to protect electronic circuits from overvoltages or to detect signals that are selectively applied. It can also be used as an isolator in a variety of circuits, such as to reduce the size of a system by using just one power supply.
The key application of the optoisolator is providing electrical isolation between two circuits. This can be used to protect sensitive equipment from high voltages or to prevent noise from travelling between the two circuits. It can also be used as a bridge between digital and analog circuits, or as a galvanic isolator to block DC signals.
The optoisolator works by connecting a voltage source to the LED, which emits light at a particular intensity. The light is detected by the photodetector, which then enables the output transistor as the LED current increases. In this way, the optoisolator provides a continuous signal from one circuit to the other with a minimum of signal loss and a high degree of electrical isolation. This provides a number of advantages, such as greater noise immunity, longer operating life and higher efficiency.
The LTV-824H is a versatile optoisolator with a reliable, cost-effective design. Its wide range of applications and reliable performance make it a popular choice in many different industries. It is available in a wide range of packaging and can be used in a variety of electronic circuits.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...