Allicdata Part #: | 1817-1056-ND |
Manufacturer Part#: |
LVE-45-300-R-01-10-S |
Price: | $ 0.69 |
Product Category: | Sensors, Transducers |
Manufacturer: | Alliance Sensors Group |
Short Description: | ROD ENDS, 12" RANGE, 0-10VDC, SS |
More Detail: | LVIT (Linear Variable Inductance Transducer) Senso... |
DataSheet: | LVE-45-300-R-01-10-S Datasheet/PDF |
Quantity: | 5 |
1 +: | $ 0.63000 |
5 +: | $ 0.63000 |
Series: | LV-45 |
Part Status: | Active |
For Measuring: | Linear Position |
Technology: | LVIT (Linear Variable Inductance Transducer) |
Rotation Angle - Electrical, Mechanical: | -- |
Linear Range: | 0 ~ 304.80mm (0 ~ 12.00") |
Output: | 0 V ~ 10 V |
Output Signal: | -- |
Actuator Type: | Round Shaft |
Linearity: | ±0.15% |
Resistance Tolerance: | -- |
Voltage - Supply: | 0 V ~ 10 V |
Mounting Type: | Chassis Mount |
Termination Style: | Connector |
Operating Temperature: | -20°C ~ 85°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LVE-45-300-R-01-10-S is a rotary optical encoder system that can provide excellent precision measurement. It is usually used in industrial, medical and other applications where it is important to measure the angle or linear position with a high degree of accuracy.
Application Field
This device can be used for a wide range of applications, including laboratory, medical and industrial automation. It is also suitable for measuring rotational and angular velocity, directional sensing of industrial machines, rotary instrumentation, optical choppers and other motion controlled applications.
Working Principle
The LVE-45-300-R-01-10-S uses an optical sensing mechanism to measure the angle or linear position. The sensing mechanism consists of two halves that can be mounted on either side of the shaft. The left side contains a light source and a lens, while the right side contains a light receiver. When the shaft rotates, the light emitted by the light source is focused by the lens onto the light receiver. The light receiver then sends the signal to the control electronics which can then calculate the angle or linear position of the shaft.
The accuracy of the LVE-45-300-R-01-10-S is quite remarkable, as it can measure the angle of the shaft to within 0.003 degrees. The device has a long working life, as it is capable of providing accurate readings for more than 10 million readings. The device is also small, lightweight and easy to install, making it suitable for a variety of applications.
In order to maintain the accuracy of the LVE-45-300-R-01-10-S, it is important to ensure that the shaft is clean and free from dust, dirt and other debris that could impede the accuracy of the device. The device also requires regular calibration to ensure that it is providing accurate readings. Additionally, it is important to ensure that the light source and lens are properly aligned in order to provide maximum accuracy.
The LVE-45-300-R-01-10-S is a versatile device that can provide precise measurements in a variety of applications. It is capable of measuring the angle or linear position with a high degree of accuracy, and it is small, lightweight and easy to install. Additionally, it is capable of providing accurate readings for more than 10 million readings. As such, it is an ideal solution for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
POS TRANS-XDCR EWA-114 WIPERSensor
POS TRANS-XDCR MEL 75 MMSensor
POS TRANS-XDCR LFT 6 IN 5K/1.0%Sensor
POSITION TRANSDUCERSensor
POTENTIOMETERHall Effect Sensor Rotary P...
ROTARY NON-CONTACT ANALOG SENSORHall Eff...