Allicdata Part #: | M-1305200-ND |
Manufacturer Part#: |
M-1305 200 |
Price: | $ 19.48 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Nidec Copal Electronics |
Short Description: | POTENTIOMETERS |
More Detail: | 200 Ohm 1 Gang Linear Panel Mount Potentiometer No... |
DataSheet: | M-1305 200 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
20 +: | $ 17.71180 |
40 +: | $ 14.56290 |
60 +: | $ 12.59500 |
100 +: | $ 12.20140 |
260 +: | $ 11.41420 |
500 +: | $ 10.54830 |
Series: | M |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Taper: | Linear |
Moisture Sensitivity Level (MSL): | -- |
Resistance (Ohms): | 200 |
Tolerance: | ±5% |
Number of Gangs: | 1 |
Built in Switch: | None |
Power (Watts): | 1W |
Temperature Coefficient: | ±50ppm/°C |
Number of Turns: | 5 |
Rotation: | 1800° |
Adjustment Type: | User Defined |
Resistive Material: | Wirewound |
Termination Style: | Solder Lug |
Actuator Type: | Slotted |
Actuator Length: | 0.650" (16.50mm) |
Actuator Diameter: | 0.118" (3.00mm) |
Bushing Thread: | M6 x 0.75 |
Mounting Type: | Panel Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats come in many forms, from the M-1305 200 being one of them. The M-1305200 is a rotary device which can measure voltage and current. The device is the most suitable for applications which require a low resistance, high accuracy and high-power rating devise. It is used in a wide variety of areas, from medical applications, scientific research and electrical engineering.
The M-1305 200 is a precision, variable resistor. It is a derivative of the Potentiometer and works similar to a Rheostat. A potentiometer is a device which is made of two resistive elements. One of them is static, and the other one is adjustable. When the adjustable element is moved, so goes the resistance of the circuit which is connected to the two elements. This enables the device to determine values such as the voltage of a circuit, current and other electrical terminals. Potentiometers usually vary in resistance from about 1Ω up to 10K. As for the M-1305 200, it has a higher resistance of up to 100KΩ and come in a wide variety of shapes and sizes.
The main difference between a potentiometer and a Rheostat is that the Rheostat allows for more precise control. This is due to its higher range of resistance, allowing for the user to select from a much wider variety of elements. Rheostats are also used to control current, but this is limited to a certain level and so is not as controllable as a potentiometer. However, the M-1305 200 covers both devices, due to its 100KΩ resistance, and so can be used for both current and voltage measurements.
The M-1305 200 is a great device for many different applications. It is used for medical applications, such as electrolyte monitors or saline pumps. In the scientific research field, it has been used for control boxes in laboratories and for measuring electrical values. It is also widely used in the electrical engineering field, as it is able to handle higher levels of power and is more resistant to surges and overheating than standard potentiometers. This device also has a great accuracy rating and is extremely durable.
The working principle of the M-1305 200 is very simple. A slide arm or a rocker switch may be used to select the desired resistance. This is then adjustable by a slider or other mechanism, which allows for a very precise selection. The device is then connected to the voltage and current source, from which it can measure the values which need to be determined. This information is then collected and stored in the device, where it can be used to determine the resistance value.
The M-1305 200 is a great device for many different uses. It is used for medical, scientific research and electrical engineering applications, due to its extreme accuracy and reliable durability. It is powered by a voltage and current source and is connected in a series circuit. It can measure resistance values up to 100KΩ, allowing it to be used in place of both a potentiometer and a Rheostat. This makes it the perfect device for a wide variety of tasks and makes it a very versatile tool for many different applications.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...