M-1305 500

Series:	M
Part Status:	Active
Lead Free Status / RoHS Status:	--
Taper:	Linear
Moisture Sensitivity Level (MSL):	--
Resistance (Ohms):	500
Tolerance:	±5%
Number of Gangs:	1
Built in Switch:	None
Power (Watts):	1W
Temperature Coefficient:	±50ppm/°C
Number of Turns:	5
Rotation:	1800°
Adjustment Type:	User Defined
Resistive Material:	Wirewound
Termination Style:	Solder Lug
Actuator Type:	Slotted
Actuator Length:	0.650" (16.50mm)
Actuator Diameter:	0.118" (3.00mm)
Bushing Thread:	M6 x 0.75
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, RheostatsThe M1305 500 is a type of rotary potentiometer, rheostat. It is commonly used in temperature, voltage and current monitoring and control. It consists of an electric contact wire that is connected to a metal shaft that is placed inside a plastic casing. The metal shaft is then rotated by an electric motor or a hand crank.The most common application of the M1305 500 is to measure output voltage. The metal shaft contains a resistive element that changes resistance according to the rotation of the shaft. This change in resistance has a direct correlation to the output voltage of the device. The resistance can be both increasing and decreasing depending on the direction of the shaft rotation, which allows for measurements to be taken either above or below some reference point.The device is also used in temperature monitoring and control applications. It works in a similar fashion, with a resistive element changing resistance according to the temperature. This change in resistance has a direct effect on the temperature of the device. In this application, the resistance of the device will be constantly monitored, and the device works to maintain a certain desired temperature.The M1305 500 is also used in current monitoring and control applications. The device works the same way, but instead of measuring voltage, it measures current. In this application, the resistance of the device is adjusted to regulate the current flow through the device.In general, the working principle of the M1305 500 is relatively simple. It consists of a resistive element connected to a metal shaft, which is then rotated or manipulated by an electric motor, hand crank, or some other force. The manipulation of the metal shaft directly affects the resistive element, which in turn affects the output voltage, temperature, or current of the device. This makes the M1305 500 an efficient and versatile monitoring and control device.

The specific data is subject to PDF, and the above content is for reference