M-22S10 50K

Temperature Coefficient:	±50ppm/°C
Mounting Type:	Panel Mount
Bushing Thread:	M9 x 0.75
Actuator Diameter:	0.236" (6.00mm)
Actuator Length:	0.906" (23.00mm)
Actuator Type:	Slotted
Termination Style:	Solder Lug
Resistive Material:	Wirewound
Adjustment Type:	User Defined
Rotation:	3600°
Number of Turns:	10
Series:	M
Power (Watts):	2W
Built in Switch:	None
Number of Gangs:	1
Tolerance:	±5%
Resistance (Ohms):	50k
Moisture Sensitivity Level (MSL):	--
Taper:	Linear
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats, and M-22S10 50K: Application Field and Working Principle Rotary potentiometers, rheostats, and M-22S10 50Ks are three closely related device types that all feature the same basic design and operating principle. These devices are essentially an adjustable voltage divider comprised of two resistors. As the two resistors are moved relative to one another, the resistance and voltage values at different points in the circuit change.The main difference between rotary potentiometers, rheostats, and M-22S10 50Ks is in their application field and maximum resistance values. Rotary Potentiometers, for example, are often used to adjust signal levels in audio equipment and other electronic devices. This is because they offer a lower resistance and preferred precision adjustment. Rheostats are more useful for controlling higher current values: they feature a higher resistance and can handle much larger current values than potentiometers. Finally, M-22S10 50Ks are suited for applications in which a moderate amount of adjustment is required.The most common way in which rotary potentiometers work is via a resistive element that features three contacts. The two outer contacts of the element are connected to a voltage source, while the center contact is connected to whatever electronic component will receive the controlled voltage. As the potentiometer\'s “wiper” moves along the resistive element, the resistance and voltage between the two outer contacts varies accordingly.Rheostats work much in the same way as rotary potentiometers: by relying on a resistive element with two or more external connections and one internal connection. The difference is that, since they are designed to handle higher current values, the resistive element of the rheostat is usually composed of a thicker wire. This allows for less resistance and better control of larger current values.Finally, M-22S10 50Ks work similarly to both Rotary Potentiometers and Rheostats. These devices are composed of a resistor-based element, with two or more external contacts and one internal connection. However, unlike Potentiometers and Rheostats, M-22S10 50Ks lack the precision and range-of-motion that the other two offer. This makes them better-suited for applications that require only a moderate amount of adjustment.In conclusion, Rotary Potentiometers, Rheostats, and M-22S10 50Ks are all similar in how they operate. The main differences between them are in their application field and maximum resistance values. Rotary Potentiometers are best suited for precision tasks with low resistance, Rheostats are better-suited for applications that involve higher current values, and M-22S10 50Ks are best for applications that require only a moderate amount of adjustment.

The specific data is subject to PDF, and the above content is for reference