M2013B2B3G01

Toggle switches can be found in almost every device and appliance. From tiny toggle switches nested in wall jacks to large control switches inside power supplies, they are used virtually everywhere. Here, we will be discussing the M2013B2B3G01 toggle switch and its application. We will also look at its working principle.

The M2013B2B3G01 is a two-pole three-position (2P3T) subminiature single-throw on-off-momentary toggle switch. It is a latching action switch which means that the switch remains in the position it is thrown to until it is thrown to another position. It is normally open (NO) and can be used to toggle between three positions: on, off and momentary.

The switch is made of good quality material and has long electrical life with a minimum of 100,000 operations. Its low-profile structure allows for space saving, and it also has silver-electrodes that offer excellent contact reliability. It should be noted, however, that the maximum operating temperature for this switch should not exceed 85°C.

The switch is rated for 125VAC/50VDC, making it suitable for a wide range of applications including home appliances, computers, industrial and medical equipment, consumer electronics, and more. It is also ideal for use in low voltage applications such as toys, remote controls and battery-powered devices.

Now let\'s look at the working principle of the M2013B2B3G01 toggle switch. Basically, the switch works by controlling the flow of electricity. When the switch is in the on position, current can flow through the switch. When the switch is in the off position, current cannot flow through the switch. Lastly, when the switch is in the momentary position, current can flow through the switch for a limited amount of time only.

To operate the switch, the lever must be moved to each position. The momentary position is used when a temporary connection is required. In this position, current will flow while the lever is held in place. When the lever is released, the switch will automatically switch off again.

In conclusion, the M2013B2B3G01 single-throw toggle switch is ideal for a wide variety of applications. It is rated for 125VAC/50VDC and should not be used at temperatures above 85°C. It is a latching switch that can be used to toggle between three positions: on, off and momentary. And, it works by controlling the flow of electricity.