M2022SA1W30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggle Switches are available in a wide variety of designs, size and shapes, to control and manage power resources in industrial, commercial and residential applications. One type of switch is the M2022SA1W30, which is commonly used in the industrial and commercial markets. This switch is rated 30A, 250VAC and is available in over 100 configurations.

The standard M2022SA1W30 Toggle Switch operates with a single pole, single throw (SPST) configuration. It provides an on/off contact arrangement for controlling power to resistive, inductive or capacitive loads. Combined with the high switching capacity and the electrical characteristics of its contacts, it is capable of controlling current up to 30A under most normal operating conditions. It is also UL approved and is suitable for use in most industrial and commercial applications.

The disadvantage of the M2022SA1W30 Toggle Switch is its limited switching capacity. The switch is only capable of handling switchCurrent ratings between 10A and 30A at 250VAC and resistive loads up to 5A at 26VAC. The switch shall not be used for any other load applications, including inductive and capacitive loads. Additionally, the switch is only certified for use in UL approved appliances. Therefore, it can not be used in consumer applications.

The workings of the M2022SA1W30 Toggle Switch are simple and straightforward. There are two contact points on the switch, which are connected to a single-pole, single-throw (SPST) voltage source. When the switch is toggled, it changes the connection between the two contact points and allows current to flow or not flow to the connected appliance, depending on the intended application. As the switch is a mechanical device, the switch will wear out with time and need to be replaced.

In conclusion, the M2022SA1W30 Toggle Switch is a versatile switch that is easy to install and use. It is available in a range of configurations and suitable for many industrial and commercial applications. It has a high switching capacity and can be used to control current up to 30A. However, it has some limitations with regards to certain load types and must be installed in accordance with UL approved appliances. Additionally, as it is a mechanical device, it will wear out over time and should be inspected regularly and replaced as needed.

The specific data is subject to PDF, and the above content is for reference