M2033S2S2W30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggle switches are an essential component of most electronic circuits, responsible for controlling the power flow and generating signals to control other circuits. The M2033S2S2W30 toggle switch is a double-pole, double-throw (DPDT) switch designed for a range of applications. It is built to last and provides highly reliable ON/OFF switching.

The M2033S2S2W30 has a 4 inch diameter case and is rated for 30A at 12 VDC. It has a pressure-activated toggle mechanism with two position locking, allowing it to be used as an alternative to pushbutton switches. The encased contacts are made from copper alloy and rated for 125/250 VAC.

The switch consists of an actuating rod, contact plates, and a base to hold it all together. The contact plates are connected to the actuator rod, and the base is connected to the circuit. When the switch is activated, the contact plates are pushed onto the respective contacts in the circuit, allowing the current to pass from one contact to the other. When the switch is turned off, the contact plates are pulled away from the respective contacts in the circuit, thus preventing the current from flowing. The contacts are made of conductive metal, and they are rated for up to 30 A at 12 VDC.

The M2033S2S2W30 can be used in a variety of applications. It is commonly used to control the power flow in motors, heaters, and other appliances. It can be connected to a circuit in order to turn on or off a specific device, or it can be connected to various activation switches to change the power flow in the circuit. It is also commonly used as a signal generator in automation systems and other control applications.

The M2033S2S2W30 is designed for use as a safety device in order to minimize the risk of electrical shock. As such, it is usually installed in a panel or other enclosure in order to provide a level of extra protection. Additionally, the switch is designed to prevent accidental activation, given that it only switches on when the actuator rod is firmly pressed.

The M2033S2S2W30 is a reliable and versatile toggle switch, suitable for both industrial and consumer applications. It is easy to install and operate, and its design has been tested to provide a long useful life. Therefore, it is a popular choice for many switch applications, allowing engineers and designers to achieve their desired results.

The specific data is subject to PDF, and the above content is for reference