M3933/14-02S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical devices used to adjust power levels. The M3933/14-02S is a programmable attenuator specifically designed for RF applications where the ability to accurately control the output power is of paramount importance. This attenuator is a monolithically integrated, high linearity, 50 ohm variable attenuator, and is designed to provide a wide dynamic range of power control while maintaining low DC power consumption.

The M3933/14-02S is a versatile, high-performance device designed for use in a variety of RF applications. Applications include low-noise amplifiers, cellular base stations, point-to-point radios, and automotive communication systems. It is an ideal device for any system that requires very low insertion loss and excellent linearity performance.

The M3933/14-02S has a programmable attenuation range of 0 to 63 dB with 0.5 dB steps and has a wide bandwidth of DC to 6 GHz. This wide bandwidth allows it to achieve very low noise and high linearity performance. Its excellent linearity performance of 35 dBm (typical) at 2.14 GHz makes it suitable for use in systems requiring high linearity, such as cellular base stations. In addition, its low insertion loss of 1.5 dB (typical) makes it ideal for applications requiring low power consumption.

The M3933/14-02S has excellent power control performance due to its low control current consumption and fast switching times. It has a low control current of 20 mA (typical) and switching times of less than 300 nsec (typical). This low current consumption and fast switching times make it suitable for applications where speed and power control are of paramount importance.

The M3933/14-02S provides a wide range of features to meet the needs of the most demanding RF applications. It has on-chip temperature compensation, distortion cancellation, and ESD protection for enhanced reliability. It also has on-chip control logic to ensure that the attenuator remains in the desired attenuation state over changes in temperature and power supply voltage.

The M3933/14-02S is programmed via an eight-bit serial interface and is compatible with a variety of control interfaces including I2C, SPI, USB, and simple asynchronous serial interfaces. With these interfaces, it is easy to integrate the M3933/14-02S into existing systems or design new ones.

The M3933/14-02S operates on a single +5V power supply and draws a typical operating current of only 150 mA. It is also packaged in a small, surface-mount 8-pin package that takes up much less board space than other attenuators. This reduces board space and cost, making it a cost-effective solution for a variety of RF applications.

Overall, the M3933/14-02S is an ideal device for any system that requires precise and accurate power control. Its wide range of features make it ideal for applications in low-noise amplifiers, cellular base stations, point-to-point radios, automotive communication systems, and other high-performance RF applications. The low current consumption and fast switching times make it a great choice for applications that need to operate at high speeds.

The specific data is subject to PDF, and the above content is for reference