M3933/25-28N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are often used to reduce the amplitude of a signal. In some cases, it is also used to limit the flow of electrical power in an electrical system. The M3933/25-28N is a variable attenuator designed for application in RF (Radio Frequency) communication systems. It is used to insert loss in the signal path to adjust the signal level in order to maintain desired gain. This attenuator contains a small ceramic element sealed in an aluminum housing for use in various communication systems including mobile cellular telephone systems.

In mobile telephone systems, the M3933/25-28N is usually installed in the antenna feed line as a power limiter. It is used to reduce the magnitude of the signal within a certain frequency band. This allows the antenna to be correctly matched to the transmission line for optimum performance. It also prevents the antenna amplifier from saturating due to overloading from a too strong signal.

The working principle of the M3933/25-28N is based on the principle of resistance change. It consists of a resistive element, such as a foil, which is sandwiched between two ceramic layers. The resistance of the foil is adjusted by varying the distance between the two ceramic layers. When the distance between the layers is increased, the resistance of the foil decreases. This reduces the insertion loss for frequencies within the desired frequency band.

The M3933/25-28N is a wide-band variable attenuator designed to work over the frequency range of 840MHz to 880MHz. It is available in two versions, one with a maximum attenuation of 15dB, and the other with a maximum attenuation of 25dB. Its small size and excellent attenuation characteristics make it ideal for a number of applications in cellular and other wireless communication systems.

The M3933/25-28N is usually either soldered or connected via a connector to the antenna feedline. An RF signal is applied through the coax cable and the attenuator adjusts the signal level for tactical systems, tracking systems, telecommunication systems, and other wireless communication systems. The attenuator is powered by direct current and can be manually adjusted or remotely controlled. It has a high linearity, low distortion, and a wide dynamic range.

The M3933/25-28N has a range of applications in radio and communication systems, and is an ideal device for controlling signal level in these systems. It can be used to suppress interference signals, control system gain, and set the appropriate signal level for transmitting and receiving. The attenuator also helps to reduce the overall signal path loss and minimize distortion of the signal.

The specific data is subject to PDF, and the above content is for reference