M3933/30-14S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic devices that reduce the level of a signal. They are used in both analog and digital systems to reduce the amplitude of high-power signals. They are especially useful in loop control systems and power amplifiers. The M3933/30-14S is a miniature, wide-band, highly reliable, cost-effective adjustable attenuator.

The M3933/30-14S is an adjustable RF attenuator designed to improve any RF design where an adjustable level of RF power is desired. It is suitable for use in cellular base stations, amplifiers, mixers, tuning circuits, local oscillators, and other high-frequency circuits. It provides precision attenuation of radiofrequency signals, up to 30 dB in 1 dB increments.

The M3933/30-14S is typically used in a wide variety of applications requiring precise attenuation including but not limited to; RF power amplifiers, antenna tuning, low-noise amplifiers, variable-gain amplifiers, and impedance matching. It can also be used as a variable-gain amplifier and can be used in tests and measurements of RF circuits.

The M3933/30-14S is capable of bringing significant benefits in terms of design flexibility, reliability and performance. The device is designed to operate at temperatures ranging from -40°C to +85°C without any significant performance degradation. The attenuator is also designed to meet a wide range of power levels, up to 10 watts in some applications. In addition, the device is cost-effective and provides high-performance.

The M3933/30-14S is designed to function as a fixed input/variable output attenuator. The device is ultra-miniature and hermetically sealed, making it suitable for use in high-density printed circuit boards. The attenuation is adjustable by varying the control voltage. The input and output terminals of the attenuator are shielded and provide high isolation and low reflection. The device has a low insertion loss, typically 0.1 dB or better, and a high dynamic range of up to 30 dB.

The working principle of the M3933/30-14S is based on its emitter amplifier topology. The device contains two RF transistors, an integrated field-effect transistor (FET) and an inductor. The FET acts as a voltage-controlled resistor, while the inductor is used to reduce the DC current consumption. The FET is connected to a variable voltage, which controls the attenuation of the input signal. The output signal is then generated with a reduced level due to the voltage-controlled attenuation.

In summary, the M3933/30-14S is a miniature, wide-band, cost-effective adjustable attenuator. It can be used in a wide range of RF design applications, including power amplifiers, antenna tuning, low-noise amplifiers, variable-gain amplifiers, and impedance matching. The device is designed to operate at temperatures from -40°C to +85°C and can provide precision attenuation up to 30 dB in 1 dB increments. Its working principle is based on a emitter amplifier topology, which consists of two RF transistors, an integrated FET and an inductor. It has a low insertion loss and a high dynamic range of up to 30 dB.

The specific data is subject to PDF, and the above content is for reference