MA-406 22.1184MC-C0:ROHS

Series:	MA-406
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	22.1184MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±100ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	40 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 9.60mm pitch
Size / Dimension:	0.461" L x 0.189" W (11.70mm x 4.80mm)
Height - Seated (Max):	0.146" (3.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals

Crystals, also known as piezoelectric resonators and oscillators, serve as the heart of many electronic circuits. The MA-406 22.1184MC-C0: ROHS (Reactive Optimized Harmonic Sweeps) is a quartz crystal oscillator and resonator that is used in many fields, such as radios and other electronic equipment. In this article, we will discuss the application fields and working principles of the MA-406 22.1184MC-C0: ROHS crystal.

Application Fields

The MA-406 22.1184MC-C0: ROHS crystal can be found in a variety of fields, such as radios and broadcasting equipment, personal electronics, automotive electronics, navigation systems and computer technology. Its main purpose is to serve as an oscillator, producing a waveform output that is periodic, predictable and consistent. The waveform can then be used as a reference signal for timing applications, such as frequency division, clock and data recovery, waveform synchronization and signal modulation.The MA-406 22.1184MC-C0: ROHS also has the ability to provide an external reference signal at a selectable frequency. This is used in frequency division and waveform synchronization applications, allowing the user to adjust the frequency according to their needs.

Working Principles

The MA-406 22.1184MC-C0: ROHS crystal operates on the principle of piezoelectricity. The crystal is made up of two separated plates of a piezo-electric material - quartz, which generates electric charges when mechanical strain is applied to it. The strain is produced by the alternating current (AC) signal that is applied to the plates.When the AC signal is applied to the plates, it causes the plates to vibrate. The frequency of the vibration is determined by the physical dimensions of the quartz crystal, as the signal is transmitted through the crystal lattice. The frequency of crystal vibration is referred to as the “resonant frequency”. When the resonant frequency is reached, electrical energy is generated. When the electrical energy is applied across the plates, an output signal is produced with the same frequency as the applied signal.

Conclusion

The MA-406 22.1184MC-C0: ROHS crystal is a quartz crystal oscillator and resonator used in many fields. Its piezoelectric properties allow it to produce consistent and predictable oscillations, which can be used in radio broadcasting, personal electronics, automotive electronics, navigation systems, and computer technology. It is well-suited for frequency division, clock and data recovery, waveform synchronization, and signal modulation applications.

The specific data is subject to PDF, and the above content is for reference