MA-505 11.0592M-B0:ROHS

Series:	MA-505
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	11.0592MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±50ppm
Load Capacitance:	16pF
ESR (Equivalent Series Resistance):	60 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 3.30mm pitch
Size / Dimension:	0.500" L x 0.200" W (12.70mm x 5.08mm)
Height - Seated (Max):	0.181" (4.60mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: MA-505 11.0592M-B0:ROHS Application Field and Working Principle

Crystals are widely used in a variety of applications as they can generate accurate, stable frequencies that are difficult to achieve with other methods. The MA-505 11.0592M-B0:ROHS is a small, surface-mount crystal oscillator that operates at 11.0592MHz, making it a popular choice for many applications. This oscillator operates off of the Piezoelectric Effect, which occurs when certain materials (typically a single crystal or cut film) experience a change in physical dimensions due to an applied voltage. When voltage is applied to these materials, they begin to vibrate at a specific resonance as determined by their size and composition. This vibration can then be measured as an alternating electrical signal at the same frequency that the crystal was vibrating. The Electronic Design Automation (EDA) software can be used to assist with the design and optimization of MA-505 11.0592M-B0:ROHS crystal oscillators. Through software simulation, engineers can design oscillator circuits with the most appropriate frequency, stability, tuning range, and cost for their application. In addition to the EDA software, there are also a number of tools available for the design, characterization, and mounting of MA-505 11.0592M-B0:ROHS crystal oscillators. These tools provide a variety of measurements such as drive level, equivalent series resistance, equivalent parallel capacitance, frequency versus vibration range, close-in phase noise, aging and temperature coefficient. Experiment platforms, such as oscilloscope and signal generators, may be used for characterizing the frequency/phase noise, tuning sensitivity, and jions hopping.The MA-505 11.0592M-B0:ROHS is a popular choice for applications requiring very high frequencies, such as radars, telecommunications, and space-based systems. It is also used in various consumer applications due to its low power consumption and its small size, making it a great choice for low-power, high-density devices such as smartphones and tablets.Furthermore, the MA-505 11.0592M-B0:ROHS is RoHS compliant, meaning it is free of hazardous substances often found in electrical and electronic equipment. This makes it safe for use in a wide variety of industrial and consumer product applications, as the RoHS compliance ensures the crystals do not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.Overall, the MA-505 11.0592M-B0:ROHS crystal oscillator is a great choice for applications requiring very high frequencies that are also safe for consumer use. The oscillator\'s small size and low power consumption are also ideal for low-power, high-density consumer applications. The use of Electronic Design Automation software and other tools can assist with the design, optimization and characterization of the MA-505 11.0592M-B0:ROHS crystal oscillator, ensuring it is the right fit for any application.

The specific data is subject to PDF, and the above content is for reference