Series:	MA-505
Part Status:	Active
Type:	MHz Crystal
Frequency:	8MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±50ppm
Load Capacitance:	16pF
ESR (Equivalent Series Resistance):	80 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 3.30mm pitch
Size / Dimension:	0.500" L x 0.200" W (12.70mm x 5.08mm)
Height - Seated (Max):	0.181" (4.60mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Application Field & Working Principle of MA-505 8.0000M-B: ROHS

Crystals are ubiquitous in electronic circuits, being used for a range of different purposes. One particular type of crystal is the MA-505 8.0000M-B: ROHS, which is a surface-mount crystal oscillator with a low-impedance drive capability. This type of crystal is used when precise timing is required, such as in microcontrollers and other embedded systems.A crystal oscillator is a type of electronic circuit that produces a periodic signal which is used to accurately time other electronic circuits. The MA-505 8.0000M-B: ROHS crystal oscillator is designed to provide a very low-impedance drive capability to ensure that a clean, stable signal is provided. This is essential for precise timing, as any noise or distortion in the signal will introduce inaccuracy into the timing.The MA-505 8.0000M-B: ROHS crystal is a surface-mount oscillator, meaning it can be easily mounted on a printed circuit board (PCB) and requires no additional hardware or components. This makes it ideal for applications where space is at a premium and where the size of the component is an important factor.The MA-505 8.0000M-B: ROHS crystal oscillator is also compliant with the RoHS (Reduction of Hazardous Substances) regulations, which are a set of environmental regulations which limit the use of hazardous substances in electronic components. This makes the component suitable for use in applications which need to adhere to these regulations, such as medical equipment or consumer electronics.The working principle of the MA-505 8.0000M-B: ROHS crystal oscillator is based on the piezoelectric effect. This is a property of certain materials which cause them to produce an electric potential when they are subject to mechanical stress. In a crystal oscillator, a quartz crystal is used as the piezoelectric material, and the electric potential produced by the crystal is used to generate a precise, periodic signal.The quartz crystal is mounted between two electrodes, and a voltage is applied to these electrodes. This voltage is then used to create a rectangular waveform across the electrodes, which is then amplified and outputs as an exact signal. The frequency of the signal is determined by the physical properties of the quartz crystal, such as its size and shape.The MA-505 8.0000M-B: ROHS crystal oscillator is a reliable, precise component which is suitable for applications where precise timing is essential, such as in microcontrollers and embedded systems. Its low-impedance drive capability ensures that a clean, stable signal is provided, and its RoHS compliance makes it suitable for applications which need to adhere to environmental regulations. The working principle of the MA-505 8.0000M-B: ROHS crystal oscillator is based on the piezoelectric effect, which allows it to produce a precise, periodic signal with a frequency determined by the physical properties of the crystal.

The specific data is subject to PDF, and the above content is for reference