MAT10090

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic components designed to reduce the strength of electrical signals. The MAT10090 attenuator is a three-terminal active device that gives users the freedom to select various voltage-controlled attenuation levels. The application and working principles of the MAT10090 are discussed in more detail below.

The MAT10090 is commonly used in a variety of low-power, high-frequency applications, such as mobile communications, cellular telephones, and satellite receivers. This device, which is designed to provide adjustable gain in systems operating in the frequency range of 0.02 GHz to 2.4 GHz, has a maximum input voltage of 3 volts and maximum output voltage of 1.5 volts. The device is also designed with a very wide dynamic range (1.5-6.5 dB).

The operation of the MAT10090 is based on a pair of amplifier stages, each composed of an NPN transistor or an NMOSFET. The two stages are connected in series via a feedback resistor. The feedback resistor creates a voltage divider, which results in a voltage drop across the Feedback resistor : (Vf - Vi ) / (Vi + Vf) = Rf / Rf+Ri. The resulting voltage drop, which is the signal gain, is adjusted using a digitally-controlled potentiometer, which is part of the internal circuitry of the device. The device then amplifies the signal and sends it out of the output terminal.

The MAT10090 is designed for high linearity and fast response time. Linearity is achieved by using the Voltage Controlled Attenuator (VCA) branch in the device. The VCA is the adjustable signal controlled attenuator, which is designed to accurately control the attenuation of the signals. The fast response time is due to the fact that the VCA branch of the device does not utilize resistors, thus allowing the device to quickly adjust the signal strength according to the input.

The MAT10090 is also designed to consume very low power during operation. The low power consumption of the device is due in part to the fact that it does not require the usual external components used in other attenuators, such as resistors, capacitors, and inductors. Instead, the device is designed with internal circuitry that reduces power consumption.

In conclusion, the MAT10090 is a three terminal active device that is designed to provide adjustable gain in systems operating in the frequency range of 0.02 GHz to 2.4 GHz. The device is usually used in low-power, high-frequency applications and has a maximum input voltage of 3 volts and maximum output voltage of 1.5 volts. The device features a very wide dynamic range and is designed for high linearity and fast response time. It is also designed to consume very low power during operation. As such, the MAT10090 is a highly versatile device that can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference