MAX9247GCM/V+T

Series:	Automotive, AEC-Q100
Packaging:	Tape & Reel (TR)
Part Status:	Active
Function:	Serializer
Data Rate:	756Mbps
Input Type:	LVCMOS, LVTTL
Output Type:	LVDS
Number of Inputs:	27
Number of Outputs:	1
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 105°C (TA)
Mounting Type:	Surface Mount
Package / Case:	48-LQFP
Supplier Device Package:	48-LQFP (7x7)
Base Part Number:	MAX9247

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>MAX9247GCM/V+T is a serial interface communication device used for data transmission over Rx/Tx serial bus of FPD-Link III. It is used for the communication between short-distance serial channels such as from the host system to the display driver or from the display driver to the display panel.The transmission distance between the transmitting module and receiving module of FPD-Link III can reach up to 15m. The ribbon cable is generally used for the connection of transmitting module and receiving module and the resistance of the ribbon cable is small. Therefore, the baud rate of FPD-Link III communication interface can reach up to 6.6Gbps, so that multiple channels signaling signals can be sent through one cable.</p><p>The MAX9247GCM/V+T is a clockless serial interface device. It is composed of two transceiver chips, a transceiver chip receiver chip and a transceiver chip transmitter chip. It can be used to transmit a single-ended LVDS signal. The receiver chip of MAX9247GCM/V+T is clocked with the reference clock signal generated by CLK0 of its input port, so that the input signal does not need to be clocked. This serializer is based on packetized transmission architecture. The user can use 4 "Channel Settings" parameters to set the required operating parameters, including Baud Rate, Packet Size, Number of Lanes and Frame Rate. </p><p>The MAX9247GCM/V+T is a high frequency timing product with a frequency range of up to 6.6Gbps. Its working principle is to convert the signal from one clock domain to another clock domain. The serials inputted to the receiver of MAX9247GCM/V+T is synchronized to the local reference clock CLK0, their relative phase and frequency information is used to generate a signal in the clock domain of CLK0, which is a parallel signal that is outputted to the deserializer. The transmitter of MAX9247GCM/V+T is used to serialize the parallel data to serial data, and it has a frequency range of up to 6.6Gbps.</p><p>The transmission of FPD-Link III interface requires the use of MAX9247GCM/V+T. The serializer MAX9247GCM/V+T can convert the parallel data from the source device to serial data, and transmit it over the Rx/Tx serial bus. and the deserializer can convert the serial data to parallel data before it is sent to the destination device, which can reduce the overhead of the data transfer process. Thus, it is widely used in FPD-Link III interface and other high frequency serial communication applications.</p><p>In summary, the MAX9247GCM/V+T can be classified as interface - serializers, deserializers. The application field of the MAX9247GCM/V+T is FPD-Link III interface applications and other high frequency serial communication applications. It is used to convert the signal from one clock domain to another, including transmission 1-100 channels of parallel data at 6.6 Gbps.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description