MAX9984ETP+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers

The MAX9984ETP+T is an RF mixer specifically designed to meet the requirements of applications such as cellular, wireless local area networks, and global positioning systems. This device is a low-cost, low-power solution for amplifying signals from the antenna to the receiver. It is a RF mixer designed to maximize performance and minimize cost, making it an attractive choice for many RF applications.

Application Field:

The MAX9984ETP+T is well-suited for a wide range of RF applications such as cellular, wireless local area networks and global positioning systems. The MAX9984ETP+T is capable of accepting input signals from a wide range of frequencies, typically operating from 0.5 to 2.4GHz. Additionally, it is well-suited for use in several other applications, including 3G and 4G cellular networks, wireless HD video, GPS receivers, and Bluetooth systems.

Working Principle:

The MAX9984ETP+T is a voltage-controlled, active mixer designed specifically for RF applications. The mixer uses two switches to control the signal transfer between the input and output. The two switches are activated by a reference signal, typically a square wave or a pulse-width modulation signal. Depending on the amplitude and phase of the input signal, the switches control the phase of the output signal. By controlling the phase of the output signal, the mixer is able to modulate the input signal in order to amplify it.

The mixer also utilizes a variable-gain amplifier to boost the level of the output signal. This amplifier can be adjusted to fine-tune the amplification, allowing the mixer to amplify the signal more accurately and without adding distortion. Additionally, the amplifier is able to adjust the level of the output signal to compensate for any losses that may occur during the signal transfer process.

The MAX9984ETP+T is designed to be a low-cost, low-power solution for amplifying signals from the antenna to the receiver. It is also designed to reduce losses occurring during the signal transfer process, making it an efficient and cost-effective choice for many RF applications.

The specific data is subject to PDF, and the above content is for reference