MAX9985ETX-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are specialized circuits used to convert RF signals to and from the intermediate frequency (IF) domain. This allows frequency translation of signals that are too close in frequency to allow direct conversion, and also provides the ability to demodulate high-frequency IF signals. A single RF mixer can translate a signal from one frequency to another, while two cascaded mixers can convert signals simultaneously from one frequency to two other frequencies. Of the many RF mixer components on the market, the MAX9985ETX-T is one of the most popular.

The MAX9985ETX-T is specifically designed for high-bandwidth applications operating in the 400- to 4200-MHz range. It has a minimized level of cross-talk and low noise figure, which allows it to perform optimally without interference from surrounding signals or ambient noise. Additionally, it features low harmonic distortion and low conversion loss. The mixer has a wide dynamic range, high linearity, and is capable of operating over a wide temperature range of -40°C to +105°C. It also employs a built-in temperature sensor to monitor oscillator frequency stability over temperature.

The MAX9985ETX-T employs a Gilbert Cell topology to achieve the desired frequency conversion. Its Gilbert Cell design consists of two FETs that are matched with a precision resistor to create a voltage-controlled current source. One of the FETs acts as an amplifier while the other FET provides the non-linearity needed for the mixing operation. This combination of components allows the joint operation of multiple ports to permit the flow of both desired signals and undesired interference.

Each port has its own switching logic circuit, which is used to control the on/off state of the ports. The switching logic circuit is also used to provide the timing for the FETs to create an appropriate signal conversion. The MAX9985ETX-T also employs an internal power management circuit, which is used to supply power to the mixer and to monitor the current levels to ensure that the RF signal remains within the intended frequency range and is consistent over time.

The MAX9985ETX-T is well-suited for a variety of applications in wireless communication, mobile radio, radar systems, global positioning systems (GPS), and other high-bandwidth applications. It is widely used in commercial and military applications, and is one of the most robust RF mixers on the market today.

The specific data is subject to PDF, and the above content is for reference