Color - Actuator/Cap:	--
Electrical Life:	50,000 Cycles
Mechanical Life:	100,000 Cycles
Operating Temperature:	-30°C ~ 85°C
Panel Cutout Dimensions:	--
Features:	Epoxy Sealed Terminals
Ingress Protection:	--
Termination Style:	PC Pin
Mounting Type:	Through Hole, Right Angle
Illumination Voltage (Nominal):	--
Illumination Type, Color:	--
Series:	MB2000
Actuator Type:	Plunger for Cap
Voltage Rating - DC:	28V
Voltage Rating - AC:	28V
Current Rating:	0.4VA (AC/DC)
Switch Function:	On-Mom
Circuit:	SPDT
Type:	Standard
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton Switches

MB2011SS2G30 Application Field and Working Principle

Pushbutton switches are commonly used to control electrical equipment and are becoming increasingly popular in consumer electronics due to their low cost and ease of installation. The MB2011SS2G30 is a series of pushbutton switches manufactured by Omron, one of the leading suppliers of industrial and consumer electronic components. This switch is a two-pole, two-position (2P2T) type, making it suitable for a wide range of applications, including lighting and motor control.The MB2011SS2G30 is a momentary type pushbutton switch, meaning it is only momentary actuated and will return to its initial state when released. It features a full-travel switches pushing out of 1.2 cm and a contact resistance of 100 mΩ or less, which makes it suitable for a wide range of applications including lighting, motor control and other circuits. The switch can handle up to 0.5 A at 24 VDC, making it suitable for low power circuits.The MB2011SS2G30 features a snap-in pushbutton design, making it easy to install and remove from a circuit board. The switch also features an IP67 dust-proof and waterproof rating, making it suitable for use in environments exposed to dust and water. The switch also has an operating temperature range from - 20 to + 60 °C. It is available in two color options, white and red, and is cosmetically pleasing in any application.The working principle of the MB2011SS2G30 is simple. When the button is pressed, the contact points within the switch close, allowing current flow. When it is released, the contacts open and the current flow is interrupted. This action is momentary, meaning the contacts will return to their initial state when the button is released. This makes the switch ideal for use in lighting and motor control circuits, as the current flow can be easily stopped and started with a single press of the button.In conclusion, the MB2011SS2G30 is a cost-effective, reliable and easy to install momentary pushbutton switch, which is suitable for a wide range of applications including lighting, motor control and general electronics. Its snap-in design and IP67 dust and water resistance rating make it an ideal choice for any application, while its 0.5 A at 24 VDC rating make it suitable for low power circuits. With its momentary action and wide temperature range, the MB2011SS2G30 is a great choice for any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description