MB88152APNF-G-112-JNEFE1

Number of Circuits:	1
Supplier Device Package:	8-SOP
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	3 V ~ 3.6 V
Divider/Multiplier:	No/No
Frequency - Max:	134MHz
Differential - Input:Output:	No/No
Ratio - Input:Output:	1:1
Series:	--
Output:	CMOS
Input:	CMOS, Crystal
PLL:	Yes
Type:	Spread Spectrum Clock Generator
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MB88152APNF-G-112-JNEFE1 is a clock generator, Phase-Locked Loop (PLL) and a frequency synthesizer. It is a fully integrated device with all of the necessary components for complete operation. It is designed for 26.5MHz clock resolution and operation from 12V to 15V. It provides an oscillator, voltage regulator, isolator, clock generator and PLL all-in-one, thus minimizing the need for external components.

Application Field

The MB88152APNF-G-112-JNEFE1 clock generator, PLL and frequency synthesizer are intended for use in applications such as clock generation and frequency translation of digital clocks in systems, embedded systems, and desktop applications. In particular, this product can be used to provide a synchronous clock distribution around a system with minimum jitter and spread spectrum clock signals. It can be used to provide a stable, low jitter clock when used as an oscillator. In addition, it is well-suited for use in applications such as digital signal processing, time code generation, and audio/video synchronizing.

Working Principle

The MB88152APNF-G-112-JNEFE1 clock generator, PLL and frequency synthesizer is based on a Phase-Locked Loop (PLL) architecture that enables frequency synthesis from a single reference frequency. The reference frequency is set through an external reference clock input. The PLL\'s phase detector is a two-phase non-overlapping design that is able to control wide frequency range inputs.The device has two outputs with independent circuitry. One is a single-ended output. The other is a push-pull output that has higher drive capability. The output signals are generated using a PLL with Frequency Division (FD), Multiplication (MD) and Phase Detection (PD).The MB88152APNF-G-112-JNEFE1 clock generator, PLL and frequency synthesizer utilizes low-noise linear regulators and a low-noise analog isolator to improve the accuracy of the output signal. These components help to provide excellent accuracy and stability.The device supports a wide range of frequencies from 10kHz to 1GHz and can also be used to generate spread-spectrum clock signals to reduce EMI/RFI emissions. The device is able to accommodate a wide range of output parameters, including frequency, duty cycle, duty cycle distribution, and rising/falling edges.

Conclusion

The MB88152APNF-G-112-JNEFE1 clock generator, PLL, and frequency synthesizer provide a fully integrated and cost-effective solution for clock generation and frequency translation. It is designed to meet the most rigorous high-speed application requirements, offering high accuracy and low jitter. The device can be used for clock generation and frequency translation of digital clocks in systems, embedded systems, and desktop applications. It is also well-suited for use in applications such as audio/video synchronizing, time code generation, and digital signal processing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description