MBA02040C1472FCT00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The through hole resistor, also known as fixed-value resistor, is a widely used resistor type composed of a resistive element and a conductive end cap, and it is a component that adjusts current and voltage signals in electronic circuits. It is widely used in electrical and electronic circuits such as computers, communications, control, instruments, and audio-visual equipment. The fixed-value resistor MBAA02040C1472FCT00 is widely used in the electronics industry. Let\'s take a look at the application and working principle of MBAA02040C1472FCT00.

In terms of application, the MBAA02040C1472FCT00 through hole resistor is usually used to detect leakage current in USB interfaces because of its small size. By calculating the voltage at the two ends of the resistor, the measured current can be obtained, and the correct operation can be ensured in the USB circuit.

In principle, energy is converted into heat when the electricity passes through the MBAA02040C1472FCT00 through hole resistor. The material of the resistor determines how much power the resistor can dissipate. If this value is exceeded, the resistor will be damaged. This type of through hole resistor is made of metal oxide film or thick film. Metal oxide film is made of a resistive material on which the material conductivity has been changed by a deposition process, and thick film is made of a resistive material that has been sintered onto an oxide substrate.

The MBAA02040C1472FCT00 through hole resistor is designed to dissipate heat at a rate that would not cause it to exceed the working temperature and cause immediate damage. This through hole resistor feature is crucial when the device is powered on and its temperature rises because the operating temperature affects the current and voltage ratings of the device, which can affect its performance.

In addition, to protect against overvoltage, the MBAA02040C1472FCT00 through hole resistor also have surge protection. Surge protection is used to protect against surges in the power supply, which can cause damage to the device. A surge protector is a device that is often placed at the end of the power cord and is designed to reduce the risk of damage from power surges and spikes.

The construction of the MBAA02040C1472FCT00 through hole resistor is quite simple and its function is very reliable. Its main component is the large end cap made of a conductive material, such as copper or aluminum, and the resistive element, which is covered by the end cap. The outer layer of the end cap often has layer of insulation, which prevents accidental contact between the resistive element and the outer layer of the end cap. The other end of the resistor is often connected to the power source. This resistor is simple to install and is available in a variety of configurations, offering a range of resistance values from 1 ohm to 10Kohm.

Based on its design and features, the MBAA02040C1472FCT00 through hole resistor is an ideal choice for circuits where high current or power handling needs to be managed. It is also a great choice for over-voltage protection applications, as the resistor guards against power surges and spikes. This resistor also offers high reliability, which is crucial in environments where power must be managed continuously.

The specific data is subject to PDF, and the above content is for reference