MBA02040C1508FC100

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	1.5 Ohms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

A through-hole resistor (THR) is a type of resistor that is installed through or into a printed circuit board (PCB). This type of resistor is often seen in computer circuit boards and is used to control the electrical properties of other components. It is a passive electronic component which is used to reduce current flow, adjust signal levels, divide voltage, and to perform many other functions in electrical and electronic circuits.

MBA02040C1508FC100 Application Field and Working Principle

The MBA02040C1508FC100 through-hole resistor is a type of resistor which has been designed to provide precision control of electrical current and voltage in a wide variety of electrical and electronic circuits. It is a low-profile, surface mount resistor which is designed to be used in applications such as medical, automotive, and communications products. This type of resistor is also suitable for use in other applications such as consumer electronic devices, military equipment, and communication systems.The MBA02040C1508FC100 can be used in a variety of applications where the need for precision is required. In these applications, the resistor is used to ensure that the current or voltage levels being applied are controlled with as much accuracy as possible. This is usually achieved by using other components such as capacitors, inductors, and transistors which are connected in series or in parallel with the resistor. This type of resistor can also be used in power management systems in order to control the current and voltage levels in the circuit.The working principle of a MBA02040C1508FC100 resistor is quite simple. It works through the use of resistive material which acts to control the flow of current or voltage in the circuit. The resistance of this material is determined by the width of the pad on which it is mounted and the number of turns or loops in the material. The amount of current or voltage that is allowed to flow through the material is also determined by the amount of resistance that is present.The resistance of the MBA02040C1508FC100 can be adjusted by varying the number of turns or loops in the resistive material. This can be accomplished either manually by the user or by using an automated process. In addition, the resistance of the resistor can also be adjusted by changing the width of the pad on which it is mounted. This type of resistor is commonly used in circuits that require precision or accurate measurements.The MBA02040C1508FC100 is a through-hole resistor which is designed to provide precision control of electrical current and voltage in a wide variety of electrical and electronic circuits. It is a low-profile, surface mount resistor which is suitable for use in applications such as medical, automotive, and communications products. As a result, these resistors are perfect for use in applications where the need for precision is required. This type of resistor is also ideal for use in power management systems in order to manage the current and voltage levels in the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description