MBA02040C1609FCT00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors:

Resistors are widely used in electronic circuits for limiting current, dividing voltages, or for other purposes. They come in various forms and shapes, two of the most common forms are through-hole and surface mount resistors. The through-hole resistors, such as the MBA02040C1609FCT00, can connect two points of a circuit, such as the power source and ground, with simple installation method. This type of resistor also exhibits low power dissipation and low cost.

The MBA02040C1609FCT00 is a through-hole resistor that provides a high degree of accuracy and stability, and is widely used in both commercial and industrial applications. It is a small-sized, light-weight, four-terminal resistor, which combines two-metal-resister types – carbon and metal-oxide film resistors. The carbon resistor section is encapsulated inside a composite housing, while the metal-oxide section is mounted top-to-bottom on the same housing. This allows a wide range of input voltages and currents to be processed, with a fast, accurate response.

The MBA02040C1609FCT00 has an operating temperature of -20 to +125 °C, and can handle up to 6.5W power consumption. It has an operating temperature range from -50°C to 200°C. The output resistance can be adjusted by trimming the potentiometer to obtain a desired output value. Its practical applications include temperature control, frequency control, voltage control, and noise reduction.

The MBA02040C1609FCT00 has a unique construction that makes it great for power supplies. Its construction has two resistors, one is the main resistive element while the other is a semiconductor element, thus providing a short circuit protection. When the current exceeds a certain level, the semiconductor element will shut down, thus protecting the system from any excessive voltage levels.

The main working principle of MBA02040C1609FCT00 is based on Ohm\'s Law. It states that the current (I) through a conductor between two points is directly proportional to the voltage (V) on those points. Therefore, when a current passes through a resistance, it creates an opposing voltage that is proportional to the current. This opposing voltage resists the current flow, thereby regulating it. Therefore, through hole resistors, such as the MBA02040C1609FCT00, are used in applications that need precise current or voltage regulation.

The MBA02040C1609FCT00 is widely used in switching power supplies, power inverters, voltage regulators, regulators in DC-DC converters, high frequency power converters, voltage stabilization circuits, stabilized power supplies, switching regulators, and electronic loads. It is also used in several medical and aerospace applications.

Through-hole resistors are very reliable and cost effective, and can be used in a wide range of applications. The MBA02040C1609FCT00 is a great example of such a resistor, as its precision and small size make it perfect for high power applications. It is also a great choice for applications where space is at a premium, such as in mobile devices and wearable electronics.

The specific data is subject to PDF, and the above content is for reference