MBA02040C2618FRP00

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.61 Ohms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors (THRs) are one of the simplest electrical components, but they can be found in a variety of electronic devices and circuits. A THR is a two-terminal resistor mounted onto a printed circuit board (PCB). It can connect two or more circuits together, provide a current limiting capability, form signal conditioning networks, provide protection to sensitive circuits and perform voltage division. The specific device type that will be discussed in this article is a part number MBA02040C2618FRP00, an axial leaded through hole resistor. These resistors use two metal leads, which are passing through the resistor body and then soldered onto the PCB.The application of MBA02040C2618FRP00 type of resistors are mainly used in high frequency RF circuits. As impedance is required for such frequencies and the value variance of resistor is small at such frequencies, this type of Mouser resistor is the most suitable. Furthermore, high resistance values are also needed in these circuits, and as these resistors are axial leaded, the values as high as 18000 ohms can be achieved with this device. Moreover, in most of the application circuit the maximum power is very low and this device is capable of handling a maximum power of 0.2 Watts. The working principle of MBA02040C2618FRP00 type of resistors is very simple. When electrical current flows from one end of the resistor to the other, a voltage drop is observed between the two ends. This voltage drop is directly proportional to the electrical current (Ohm’s law). This voltage drop is due to the resistance offered by the resistor material which is generally an alloy of nickel and copper. The resistor material also offers a very low inductance and capacitance, thus keeping the signal clean and isolated. This makes the device ideal for use as RF signal isolators, current limiters and signal conditioning. The resistors can also be used as voltage divider circuits, where the output voltage is proportional to the ratio of the resistors used. In conclusion, MBA02040C2618FRP00 type resistors are ideal for use in high frequency RF circuits due to their low inductance and capacitance, high resistance values and low thermal resistance. Their simple working principle of resistive voltage drop makes them an essential component in many electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description